Handloads: Reduced-Recoil .30-’06 Springfield

posted on December 30, 2020
** When you buy products through the links on our site, we may earn a commission that supports NRA's mission to protect, preserve and defend the Second Amendment. **
06springf.jpg

Not all of the energy that a rifle cartridge can develop is necessary all the time, and excess power can be detrimental to meaningful practice. That’s where reduced-recoil handloads come in.

.30-’06 SpringfieldAn easy method of developing reduced-recoil loads is with Hodgdon Powder’s 60 percent formula for H4895 propellant that can be loaded in a variety of cartridges from .243 Win. to .300 WSM. Take the maximum amount of H4895 listed with a bullet in a reloading manual and multiply it by 60 percent to arrive at a starting point for a reduced-recoil load that can be increased slowly to attain the desired velocity and accuracy.

Hodgdon’s reloading manual lists 51.0 grs. of H4895 as maximum for Nosler 150-gr. Ballistic Tip bullets loaded in the .30-’06 Sprg., and 60 percent of that charge is 30.6 grs. Increasing that slightly to 32.0 grs. resulted in a velocity of 1957 f.p.s.; however, it also produced a three-shot group that measured nearly 2" at 100 yds. and an extreme spread of velocity of 135 f.p.s. Bumping up the charge up to 34.0 grs. increased velocity to 2056 f.p.s., but the group size was still nearly 2" and extreme spread of velocity was 99 f.p.s. The sweet spot came at 38.0 grs., which boosted velocity to 2263 f.p.s. with 81 f.p.s. velocity spread over nine shots with an average group size of 0.91" at 100 yds. 

At that muzzle velocity, 150-gr. Ballistic Tips are traveling 2078 f.p.s. and carrying 1,438 ft.-lbs. of energy at 100 yds., and still moving 1900 f.p.s. and packing 1,202 ft.-lbs. of energy at 200 yds. Hitting on aim at 100 yds., the bullets drop 6.5" at 200 yds. That mirrors the .30-30 Win. and would make a good deer-hunting load. Most importantly, recoil is half that of the maximum .30-’06 Sprg. load—the perfect prescription for plenty of practice.

Latest

Making Keltec Pr57 1
Making Keltec Pr57 1

Making The KelTec PR57 In Wyoming

To make its PR57 handgun, KelTec invested in an entirely new manufacturing facility located in Rock Springs, Wyo. "American Rifleman Television" headed out for an inside look at the company's efficient production process.

Taurus 66 Combat: A New "Fighting Revolver"

First introduced in the 1970s, the Taurus 66 Combat is a medium-frame revolver that has seen several evolutions in its lifetime, and the latest update creates what the company considers "the final word in fighting revolvers."

Review: Taurus GX2

From cars to cellphones, as a product gets more sophisticated, it usually also gets more expensive. And, as modern handguns get more modular and optic-ready, their prices tend to go up.

Rifleman Q&A: A Garand Puzzlement

"We are a father-and-son NRA member tandem in search of an answer regarding the branding of an M1 Garand rifle. We own an M1 rifle that has markings indicating it was a “lend lease to England,” and it also has a .308 barrel/sleeve."

$160K Raised For HAVA At SIG Sauer Event

SIG Sauer hosted its 9th Annual Honored American Veterans Afield (HAVA) Charity Golf event early last month and raised more than $160,000 to support disabled veterans.

Scout The Trail To A General Purpose Rifle

The search for a universal longarm—one suitable for both hunting and defensive scenarios—is a trek that involves a bit of doubling back.

Interests



Get the best of American Rifleman delivered to your inbox.