Bouncing Targets

by
posted on December 6, 2011
** When you buy products through the links on our site, we may earn a commission that supports NRA's mission to protect, preserve and defend the Second Amendment. **
wiley-clapp.jpg

Handgunners in search of a new target for informal plinking and impromptu competitions need to take a look at a new device I recently found. Made by a company called Do-All Outdoors, this new target is known as a bouncing ground target.

It comes in four variations—ribbed ball, cube, top hat and solid ball—each of which is made of bright orange plastic. The material is said to heal behind a bullet's path and my two samples do seem to be holding up pretty well. The idea is to throw the target well forward of the firing line, then shoot the target in an effort to make it bounce. Since the surfaces are irregular, it's hard to predict what trajectory the target will take when hit. It seems to be almost impossible to drive one straight back. I tried.

This idea of a reactive target that hops, skips and jumps around presents a great many possibilities for shooting fun. How about setting the target at 20 yards and timing how long it takes to drive it to the 50 yard line? Or put out a pair for two shooters, who then race to the finish line. If you bounce your target up in the air and hit it again before it touches the ground, you get bonus points. The possibilities are seemingly endless.

The maker's website claims that the targets will take up to a thousand hits. Mine have nowhere near that total, but seem to be holding up very well. Naturally, the longevity of the target depends on the caliber. Big magnums beat up the plastic more than .22 shorts. Also, you are shooting at a target on the ground. If the ground is hard, you are going to get ricochets. Be very careful that you are not bouncing bullets out of the range. As always, you are responsible for everything that happens when you press that trigger.

Latest

.308 Win.
.308 Win.

Handloads: A Quiet .308 Win. For Large-Format Pistols

Of the many commercial .308 Winchester loads, few, if any, are designed for barrels shorter than 16". The one that follows helps address this gap while remaining simple to suppress and light on the wrists.

Court Approves Watchtower Firearms DIP Financing

Watchtower Firearms was granted final approval for debtor-in-possession (DIP) financing by the U.S. Bankruptcy Court for the Northern District of Texas in late June.

Review: Ruger LC Carbine In 10 mm Auto

Following the success of its .45 ACP-chambered LC Carbine, Ruger realized that this platform would go a long way toward making the 10 mm Auto more controllable and fun to shoot, and a new 10 mm version was released in 2024.

The Armed Citizen® July 14, 2025

Read today's "The Armed Citizen" entry for real stories of law-abiding citizens, past and present, who used their firearms to save lives.

Favorite Firearms: A Little Stevens From Chicago

"Over the next five or six years, and before I went off to college, I fired hundreds and hundreds of rounds of .22 BB Caps, CB Caps, Shorts and Longs through this rifle."

Preview: Strike Industries T-Bone Charging Handle

The T-Bone from Strike Industries is an ideal fit for suppressed applications, as it can be configured by the user to redirect gas blowback entirely to either side ...

Interests



Get the best of American Rifleman delivered to your inbox.