Browning BAR ShortTrac .270 WSM

by
posted on May 12, 2009
** When you buy products through the links on our site, we may earn a commission that supports NRA's mission to protect, preserve and defend the Second Amendment. **
200951992030-browningshortrac_fs.jpg

Introduced in 1967, the gas-operated Browning BAR has proven to be a reliable and very successful semi-automatic sporting rifle. But, with development of the Winchester Short Magnum family of cartridges, Browning has made some radical aesthetic and ergonomic changes to the venerable BAR.

The standard Safari and Lightweight Stalker BARs are still offered, but the new LongTrac and ShortTrac bring modern European styling to the design. The ShortTrac (designed for short-action length cartridges) is offered in .243 Win., .308 Win., .270 WSM, 7 mm WSM and .300 WSM, while the LongTrac handles the longer .270 Win., .30-'06 Sprg. 7 mm Rem Mag. and .300 Win. Mag.

The European-style walnut fore-end and contoured buttstock differentiate the ShortTrac from more traditional American-style BARs. The .270 WSM we received has a more angular fore-end that extends farther to the rear, covering the front of the lower receiver. There are pronounced ascending thumb grooves on either side of the fore-end, and the belly is checkered in an angular pattern. A sling swivel stud protrudes from the front of the fore-end.

The buttstock has a full pistol grip, again with fine checkering, and seemingly arbitrary angular lines on its surface. A user-adjustable shim system (as is often found on shotguns) allows the shooter to tailor the gun to his or her dimensions. Each gun includes six spacers that install between the buttstock and receiver, allowing adjustments to the drop of comb, drop at heel and cast on or off. The 1-inch soft rubber recoil pad is radiused at its top to aid in rapid mounting and is contoured to the lines of the butt.

The BAR's basic operation remains unchanged. The seven lugs of the bolt head rotate 60 degrees to engage recesses in the barrel, providing steel-on-steel lock-up. The head is rotated by a cam pin in the bolt sleeve, or carrier, after that part has moved rearward about 3/16 inches. The spent cartridge case is withdrawn by a hook extractor on the right side of the bolt head and ejected by a plunger ejector on the left.

The short-stroke piston system operates much like that of the M1 Carbine. On firing, propellant gasses pass through a hole in the barrel and drive a captive piston rearward. This in turn strikes a heavy inertia piece that, working through the action bars, unlocks the action. Gas is regulated by a screw passing diagonally into the right side of the cylinder.

The bolt-release lever is at the right front of the receiver, and it has been extended and recontoured due to the lengthened fore-end. After the last round of a magazine is fired, the magazine follower presses the lever up into engagement with the right slide bar, locking the bolt assembly open. Pressing the lever down disengages it from the slide, allowing the bolt to slam home.

The trigger assembly, riding in a polymer housing, is removed by driving out a pair of pins. The floorplate and trigger guard, too, are of molded composite, and the three-round-capacity magazine can be loaded simply by pulling back on its catch in front of the trigger guard and inserting ammunition. The box may be separated from the floorplate by pulling up on its rear end. The safety is a trigger-blocking crossbolt at the rear of the trigger guard.

All ShortTrac barrels are produced by Fabrique Nationale in Belgium (Browning's parent company) and are of hammer-forged, blued steel with a high polish. This is in contrast to the attractive matte-anodized finish of the rifle's receiver. No iron sights are supplied, but the receiver is drilled and tapped for scope mounting.

Our sample .270 WSM was rifled with a 1:10-inch right-hand twist and featured a slight recess at the muzzle crown to protect the rifling. It was function-fired and shot for accuracy with results shown in the accompanying table. There were no failures of any kind.

The ShortTrac is a handsome, if non-traditional looking, addition to the BAR line. It brings clever features from the company's shotgun side into a lightweight, handy-and thanks to its WSM chamberings-powerful rifle that we would take afield anytime.

Latest

Armasight Operator thermal riflescope
Armasight Operator thermal riflescope

New for 2026: Armasight Pro Series Thermal Platform

Armasight launches a professional-grade thermal-imaging platform designed to perform.

KelTec Launches KelTec Direct

KelTec begins its 35th anniversary celebration by launching KelTec Direct.

New for 2026: CVA Scout XP and XP-SB Rifles and XP Pistol

CVA expands its Scout line to include two single-shot rifles and a single-shot pistol.

Preview: Winchester After Hunt Dog Bed

Named after John Olin’s famed hunting dog, the King Buck product line exists within the larger Winchester Pet brand to showcase the company’s most deluxe offerings, and the After Hunt Dog Bed is a prime example of the line’s quality.

Review: CZ USA P10 Ported

CZ expanded its popular line of P10 handguns with a specially configured model that features integral barrel ports just behind the muzzle to aid in recoil management.

Keeping The Wilderness Quiet: Bergara's BTi30 Suppressor

Bergara joined the growing crowd of suppressor manufacturers in 2026 with its BTi30 design.

Interests



Get the best of American Rifleman delivered to your inbox.