STI Guardian Pistol Review

by
posted on August 15, 2016
** When you buy products through the links on our site, we may earn a commission that supports NRA's mission to protect, preserve and defend the Second Amendment. **
lead_stiguardian-ds-2016.jpg

As a longtime aficionado of the 1911 pistol, I am always interested when someone offers a new wrinkle to my favorite autoloader. So when STI announced a light, compact 1911-style pistol with a high-capacity magazine I was like a kid at a carnival; I had to lift the tent flap and take a peek.

Though based upon John Browning’s most famous pistol, STI calls this series of pistols the 2011. The most obvious difference between a 1911 and STI’s 2011 is that the new gun is made to take double-column, high-capacity magazines. Much of the company’s history has been to cater to the competitive shooter, and in today’s modern competition, performing reloads is a time-consuming chore most want to minimize. That’s also true for those who carry a firearm for self-defense.

The Guardian features a two-piece frame; the upper portion being Cerakote-finished aluminum, while the lower portion is made from glass-filled polymer. Like all the 2011 series, the lower grip frame has a squared-off trigger guard for those shooters still lost in the ’70s. The grip panels are steel reinforced polymer and are of the shorter, Officer Model type—STI calls it their 2011 VIP grip. The company claims the polymer lower portion flexes enough to soak up some of the recoil, but I have no way to measure or determine whether that is true.

Up top, the slide is stainless with a bead-blast finish on top and polished sides. Barrel length is 3.9" and is sans the traditional barrel bushing. It is thought that, especially with such a bantam-weight pistol, the bull-barrel configuration helps the shooter control recoil better. Frankly, I’ve shot bull and bushing barrels side by side and could not discern much of a difference. The barrel is also ramped so that hollowpoint ammo will not chew up the frame’s feed ramp. Recoil is dealt with by STI’s Recoil Master system, basically a dual-spring, full-length guide rod system. Sights are a TAS (Tacital Adjustable Sight) fully adjustable rear with a pair of white dots and a ramped front with a white dot. They are not tritium. The slide features seven coarse gripping serrations at the rear, as is the norm of today. There are no front serrations.

For the fire-control system, STI uses a slightly different hammer. Like all modern 1911s it has a rounded rowel profile and is skeletonized, but the skeletonization is not the now-familiar oblong hole. Rather the hole remains round, and a pair of lightning slots the width of the hole on each side and extends from it to the front of the hammer. Sides of the hammer are brightly polished while the bottom of the slots have been bead blasted. The requisite beavertail grip safety with a cheater pad on the low end to guarantee disengagement protects the shooter from hammer bite. A Commander-style ejector positively ensures that fired cases will leave the pistol cleanly. The manual safety is extended but not lowered much and is set up for right handers only. A long, skeletonized trigger with a stop screw completes the fire-control system.

The 2011 Guardian is chambered in 9x19 mm only, and as such features a dual-column, 15-round magazine. To be honest, there have been some issues with the current crop of magazines, and STI is working on a new magazine that addresses these issues. One issue is that with the magazine fully inserted, there is an unsightly gap of about 3/32" between the bottom of the grip frame and the bottom of the magazine. More about this in a moment.

I confess that normally I am not much of a fan of double-wide magazines. They make it near impossible for my short, fat digits to make the trip to the trigger with a proper hold. However, STI has engineered the 2011 Guardian to have a grip profile a mere 0.25" larger than a standard steel 1911 grip profile. I was able to control the pistol fairly well in slow fire.

My first range session was rather frustrating. Normally, the Guardian ships with one magazine, but STI—who again is aware of the magazine problem—sent me four to test with. One mag failed to feed the first round when full; though once I got past that it fed flawlessly. Another mag interfered with the trigger and required more than twice the normal trigger pull (4 lbs., 6 oz.) to get the pistol to fire. The other two mags functioned without interruption and were the ones that I used to complete the test. As I said, STI is aware of this issue, and a new, redesigned magazine will be available by the first of the year. Meanwhile, STI will make good on any magazine that fails during testing.

Once we got past the magazine issue, I found the Guardian to be an accurate, dependable and pleasant pistol to shoot. Many groups were less than 2" at 15 yards, and I was pleasantly surprised at the velocities I recorded from the abbreviated barrel. The Guardian showed a definite affinity for lighter bullets; 115-gr. Barnes TACs as loaded by Double Tap produced groups consistently less than 2". Once the drudge work was completed, the fun drills of draw-and-shoot were done. I used my Yaqui Slide holster since I did not have a dedicated holster for the shorter pistol. It was a little slower getting into action and the shots consistently placed about 2" to the left of POI, but I attribute that to my short, fat digits. A short trigger would help me a lot. One happy occurrence was that, especially from the bench, all empties landed in about a five-foot circle. I didn’t have to sacrifice but a few rounds of brass to the desert gods.
 



Despite its light weight—25 oz.—the Guardian is remarkably controllable. Much of that is due in no doubt to its 9 mm chambering—all of my personal 1911s are .45 ACP. Things I like about this pistol are: its controllability, firepower, ergonomics and reliability after the magazines were sorted. My only dings—outside of the mags—are the long trigger, the squared-off trigger guard and lack of tritium inserts in the sights. All of these can be addressed, however, and are particular to my sensibilities. At an MSRP of $1899, the Guardian is a premium pistol for those who desire the handling characteristics of a 1911 along with modern high-capacity firepower. For more info go to stiguns.com.

Shooting Results

NRA Specifications
Manufacturer: STI International
Model: 2011 Guardian
Caliber: 9x19 mm
Action Type: Recoil-operated semi-automatic
Receiver: Aluminum/Steel Reinforced Polymer
Barrel: 3.9" bull barrel
Rifling: 1:10” RH
Magazine: Double-column, 15-round
Sights: TAS rear; ramped front with white dots
Trigger Pull: 4 lbs., 6 oz.
Grips: Black VIP
Overall Length: 7.5"
Weight: 25 oz.
Accessories: Allen wrenches, hard case
MSRP: $1899

Latest

Stuart 45 Pistol Pre War Manuevers Web Main
Stuart 45 Pistol Pre War Manuevers Web Main

Guns Of The U.S. Tankers In World War II

Since the end of World War II, debates have raged about the effectiveness of American armored fighting vehicles in that conflict. Despite all the Monday morning armored quarterbacking, American AFVs were war-winners, driven to victory by some the finest fighting men our nation has ever produced.

MidwayUSA Foundation Awards Over $14 Million In Cash Grants In 2025

In honor of National Shooting Sports Month—held annually in August—along with the growing popularity of the sport with new participants, MidwayUSA Foundation announced it has distributed more than $14.2 million in cash grants to support youth shooting sports in 2025.

Making The KelTec PR57 In Wyoming

To make its PR57 handgun, KelTec invested in an entirely new manufacturing facility located in Rock Springs, Wyo. "American Rifleman Television" headed out for an inside look at the company's efficient production process.

Taurus 66 Combat: A New "Fighting Revolver"

First introduced in the 1970s, the Taurus 66 Combat is a medium-frame revolver that has seen several evolutions in its lifetime, and the latest update creates what the company considers "the final word in fighting revolvers."

Review: Taurus GX2

From cars to cellphones, as a product gets more sophisticated, it usually also gets more expensive. And, as modern handguns get more modular and optic-ready, their prices tend to go up.

Rifleman Q&A: A Garand Puzzlement

"We are a father-and-son NRA member tandem in search of an answer regarding the branding of an M1 Garand rifle. We own an M1 rifle that has markings indicating it was a “lend lease to England,” and it also has a .308 barrel/sleeve."

Interests



Get the best of American Rifleman delivered to your inbox.