Rossi Rio Grande Review

posted on October 12, 2011

There was a time when the word “rifle” almost exclusively meant a lever-action. The lever-action rifle is an iconic part of America and as much a symbol of the Old West as a worn-out pair of cowboy boots or a set of spurs. Its fame is not just celebrated in the dust of the West, though, as eastern deer hunters have long relied on the lever-action. For the lever-action enthusiast, Rossi offers multiple models, including the unconventional.

Founded in 1889 by Amadeo Rossi, his namesake company is a leading manufacturer of single-shot rifles, muzzleloaders and shotguns; however, Rossi offers a diverse selection of lever-action rifles built around the famed Winchester Model 92 action, too. It has also unveiled a lever-action rifle similar to the Marlin Model 336. Rossi’s lever guns are unusual, but one covered here is not a rifle at all. The Rio Grande is indeed a lever-action long gun but is chambered to fire .410-bore shells. While specialized in nature, this firearm represents Rossi’s commitment to innovation and its dedication to providing shooters with unique and dependable firearms that are fun to shoot.

Rossi Model RG410B
Not only does the Rossi Rio Grande, Model RG410B, reflect the looks of Marlin’s Model 336, its investment-cast action features Marlin’s customary side-ejection and bolt-banded extractor. But, the RG410B’s walnut stained, straight-grained hardwood stock is a bit slimmer in both the butt and the fore-end. There is a barrel band at the front of the fore-end and another one 1/2-inch rearward of the muzzle.

The RG410B has the modern Marlin-style, cross-bolt receiver safety that blocks the hammer when engaged. If the trigger is pulled the hammer will fall; however, its forward travel is stopped just short of the firing pin. Purist may scoff at this arrangment, but it’s an inherently safe design.

Each shotgun is shipped with a factory-installed, Weaver-style scope base that matches the mounting holes found on Marlin Model 336s. The shotgun features a semi-buckhorn rear sight that is adjustable for elevation and windage, and the front sight is a thin, yet tall, blade topped with a brass bead measuring 0.090 inches in diameter. The front sling swivel stud is fitted to the rear barrel band, while the other is at the toe of the buttstock. Capping the buttstock is a 1-inch ventilated rubber recoil pad atop a thin white line spacer.

I was initially skeptical of how well a rifle/shotgun like this might function with .410 shotshells. But my worries were quickly dispelled after testing four different .410-bore loads—75 shots in all—without a single failure to function, fire or cycle. It also proved accurate with slugs. Using a Vortex Strike Fire Red Dot Sight System affixed atop the Weaver-style rail to aid sighting, Winchester slugs would print five-shot groups between 3 and 5 inches at 50 yards.

The choke on the Rossi RG410B is fixed “modified” but is not denoted on the barrel. Winchester’s three-pellet 000 Buck load spread between 10 and 12 inches at 20 yards. Typically one can expect buck shot to spread about 1 inch per yard, so this was fairly tight. Winchester’s No. 6 shot Game & Field load patterned within 20 inches at 20 yards, with an average of 12 pellets inside the 6-inch center circle. Pattern density was reasonably consistent.

The really interesting load was the Winchester PDX1 .410 Defender. This personal-defense load consists of three copper-plated Defender Disks atop 12 plated BBs. At 20 yatds the total pattern size was similar to the buckshot load, averaging between 10 and 12 inches. Where legal, this might be a great turkey load, and there is no doubt it would work for personal protection.

The Rossi Rio Grande .410 lever gun was a pleasure to shoot. Recoil was mild with all loads tested and functioning was flawless. Even though my 11-year-old son likes ARs and precision bolt-action rifles, he has a passion for lever-actions. He could load and handle the Rossi with ease, and even though it was just a tad heavy for him when shooting off-hand, he managed a string of good hits at 40 yards with slugs.

This would make a great option for a kid that might also hunt with a center-fire, lever-action rifle. Operation is identical. Actually, from a practical standpoint, with deer hunting ranges inside 60 yards, this gun could fill a multitude of tasks from big-game hunting to home defense.

Importer: Rossi; (306) 474-0401;
Model: Rio Grande
Action: repeating lever-action shotgun
Caliber: .410 bore
Magazine Capacity: tubular, five
Receiver: investment cast 4140 blued carbon steel; or stainless steel
Stock: oil-finished deluxe hardwood
Barrel: 20"; modified choke
Sights: buckhorn rear; post front
Trigger Pull Weight: 4 lbs., 4 ozs.
Overall Length: 38¾"
Weight: 6 lbs., 8 ozs.
Suggested Retail Price: $536


The Armed Citizen
The Armed Citizen

The Armed Citizen® July 22, 2024

Read today's "The Armed Citizen" entry for real stories of law-abiding citizens, past and present, who used their firearms to save lives.

Review: Chippa Little Badger TDX

Survival firearms come in many shapes and sizes, with the masses in utter disagreement upon ideal chambering—and even platform. But the Chiappa Little Badger TDX certainly fits the bill as a survival arm.

"Only Accurate Rifles Are Interesting."

"The only limitation to skill in marksmanship is that imposed by the rifle and its ammunition." Col. Townsend Whelen

Preview: The Rifle 2 | Back To The Battlefield

Read stories from the theaters of World War II, bolstered by veterans of the “Greatest Generation.” 

Review: Heritage Mfg. Roscoe

Heritage Mfg. is known for its line of Old West-style firearms, but with its new Roscoe revolver, based on Taurus' Model 85, the brand steps into the world of old-school detective work.

New For 2024: Hi-Point Firearms YC380

Hi-Point Firearms is expanding its next-generation "YEET Cannon" line of firearms with YC380 chambered for .380 ACP.


Get the best of American Rifleman delivered to your inbox.