Disassembly Guide: Browning Hi Power Pistol

by
posted on June 19, 2009
** When you buy products through the links on our site, we may earn a commission that supports NRA's mission to protect, preserve and defend the Second Amendment. **
200961991832-browninghppistol_fs.jpg

In 1922, when the French put out the call for a new military pistol chambered in 9 mm Parabellum, Belgium’s Fabrique Nationale (FN) answered with firearm titan John Moses Browning and a little-known Belgian designer named Dieudonné Saive. The American-born Browning had a long working relationship with FN, and his firearm designs were already the stuff of legend.

Browning started by creating a staggered double-column magazine that held 16 rounds, unheard of for a flush-fitting unit. As development progressed, Browning conceived of the basic shape of the pistol and its breech locking system in which the rear of the barrel cammed down to disengage dorsal lugs from recesses in the slide.

Working with an FN design team that included Saive, Browning ultimately produced a pistol called the Model 1927 Grande Rendement. However, Browning passed away in 1926 still awaiting the pistol’s patent, which was not issued until the next year. Despite Browning’s and FN’s efforts, the Model 27 Grande Rendement was found wanting. It was considered too large and heavy for its intended purpose. It fell to Dieudonné Saive to rework the design and produce a gun that satisfied the desires of the military.

Saive made numerous crucial changes to the pistol, dispensing with its complicated contours, removable plate-mounted lockwork, interrupted screw breech bolt and internal striker. He also reduced the dimensions of the gun and the capacity of the magazine. The new magazine held a still-considerable 13 rounds. Dubbed the M35 or Hi Power, the final version of the pistol was not finished until 1935, but it was a design so sound that it has remained virtually unchanged to this day.

Strangely, the French military—the original catalyst for the Hi Power’s creation—chose not to buy the gun, adopting a lesser-chambered pistol of French design. Other nations, however, immediately recognized the numerous benefits of the Hi Power, and a great many adopted it as their standard-issue service pistol. These benefits include reliability, generous magazine capacity, excellent ergonomics and the fact that it is chambered for the ubiquitous 9 mm Luger cartridge.

The FN plant was seized by the Germans during World War II, and the Nazis produced the Hi Power for their own troops. Meanwhile, Dieudonné Saive fled Belgium and eventually settled in Toronto, Canada, helping the John Inglis Co. produce Hi Powers there for Nationalist Chinese, British, Canadian and Greek forces. Thus, both sides made use of the P35 pistol during the war. A well-known variation of the gun was the Capitan model that incorporated tangent sights graduated to 500 meters and a detachable wooden combination holster/shoulder stock.

Still in production in 2004, the Hi Power remains in use by militaries and citizenries around the world and, despite myriad new designs, maintains favor for those same qualities that drew acclaim initially. While many may contend that this venerable single-action gun has been equaled, few will say that it has ever been surpassed.

Disassembly
Safety glasses should be worn when performing the assembly/disassembly procedure. Be sure the pistol is unloaded before beginning. Remove the magazine from the magazine well. Pull back the slide and push the safety catch into the second notch. Then push out the slide stop from right to left, as shown. Now release the safety catch and permit the slide to go forward and off the receiver.

Push the safety catch down to the “fire” position, then push the sear pin out from right to left. Allow the ejector to pivot down until it stops. With the ejector in this position, the safety catch can now be pushed out.
Hold the gun in your left hand and push in the magazine catch until it is flush with the frame. Using a 1/8-inch wide screwdriver, turn the magazine catch spring guide one-quarter turn counterclockwise. This will lock the spring guide to the magazine catch. Then lift out the unit.

Push the trigger pin out from right to left. Hold the gun with the right side up. With your right hand, pull the trigger forward and upward; this will allow the removal of it and related parts, and as a unit. They must be replaced as a unit when reassembling the gun. To remove the firing pin and spring, hold the slide so that the rear is facing you. With a 1/8-inch punch, push in the end of the firing pin; at the same time, push down on the firing pin retainer plate. After the firing pin and spring have been removed, pry out the extractor.

To remove the sear lever, hold the slide upside down in the right hand. Making sure the extractor has been removed, pry up the end of the sear lever retainer. When the head of the retainer is clear of the slide, pry it the rest of the way from the outside of the slide. Reassembly is in the reverse order.

Latest

Springfield Armory 1911 DS Prodigy Compact 3.5" AOS black pistol handgun right-side view
Springfield Armory 1911 DS Prodigy Compact 3.5" AOS black pistol handgun right-side view

Gun Of The Week: Springfield Armory Prodigy Compact 3.5” AOS

For this episode, we’re on the range with a double-stack, M1911-style handgun that’s more compact and lightweight than we’re used to seeing. This is the Springfield Armory Prodigy Compact 3.5” AOS chambered for 9 mm Luger.

The Armed Citizen® Aug. 1, 2025

Read today's "The Armed Citizen" entry for real stories of law-abiding citizens, past and present, who used their firearms to save lives.

Budget Pistol Rigs With AIM Surplus

It's still possible to pull together a budget-friendly, name-brand pistol rig for $300 to $400, if you play your cards right.

Nextorch Celebrating 20th Anniversary—A Timely Preparedness Reminder

Nextorch North America is celebrating the company’s 20 years of providing lighting solutions for consumers, law enforcement professionals and military forces around the world.

Rifleman Review: Smith & Wesson M&P 22 Magnum

One of Smith & Wesson's recent additions to its M&P handgun line is the M&P 22 Magnum, and there's a lot more going on in this gun, technologically, than it appears at first glance.

New For 2025: Beretta BRX1 Ranch

Beretta has expanded its BRX1 straight-pull action into a "ranch rifle" configuration, providing a handy, lightweight platform that still includes some of the groundbreaking features of the original BRX1 rifle.

Interests



Get the best of American Rifleman delivered to your inbox.