Crimson Trace Lightguard

by
posted on July 16, 2012
** When you buy products through the links on our site, we may earn a commission that supports NRA's mission to protect, preserve and defend the Second Amendment. **
201271615123-lightguard_f.jpg

7/16/2012

Since deadly encounters are more likely to occur in low-light conditions, it pays to be prepared for such; Crimson Trace’s firearm-mounted Lightguard-series illumination devices do just that by enabling increased target visibility. Tested here is the LTG-760, which fits full-size Smith & Wesson M&P pistols.

The U.S.-made Crimson Trace Lightguard is a two-piece, 1.5-ounce polymer unit that attaches to the dustcover on a pistol. The unit artfully integrates with the design of the pistol and is securely held in place by two hidden screws. Installation takes about two minutes.

The 100-lumen LED light operates on a single CR2 lithium battery, which is provided. Constant runtime is about two hours. There’s a master on/off switch and a pressure-activated button extending back beneath the trigger guard on the frontstrap, continuing the instinctive grip activation concept that applies to all of Crimson Trace’s handgun laser products.

The company offers Lightguards for Glocks, Springfield XDs, Smith & Wesson M&Ps and M1911s, which work in unison with Crimson Trace Lasergrips on all the aforementioned handgun models. Used together, the Lightguard illuminates the threat while the Lasergrip provides an aiming point for precise shot placement. The combination is particularly helpful in low-light conditions and when shooting from unconventional positions.

For testing, we added the LTG-760 Lightguard and LG-660 Lasergrips to an S&W M&P40, then subjected them to testing at Gunsite Academy’s “Fun House” during a nighttime shoot. During the low-light event, immediately evident was the value of the firearm-mounted light and laser combination; the self-defense practitioner is able to activate the light and/or laser with a single hand, leaving the remaining or support hand to open doors, dial 911, etc. Additionally, relaxing one’s grip turns off the light and the laser, allowing selective use and preventing giving away one’s position.

It must be noted that the LTG-760, or any other firearm-mounted light for that matter, should not be used for searching. Doing so requires that the gun indiscriminately “sweep” everything, an unsafe practice; instead, use a handheld flashlight independent of the firearm to search for threats.

Another advantage of the Lightguard is holster compatibility. A Lightguard- and Lasergrip- equipped Smith & Wesson M&P will fit in Galco’s Summer Comfort Light Guard inside-the-waistband (IWB) holster. Concealment holsters for other Lightguard-equipped handguns are available from various manufacturers.

The LTG-760 doesn’t displace the handheld flashlight for defensive work, rather it supplements it. As such, it should be viewed as an integral part of a complete personal-protection strategy.

Manufacturer: Crimson Trace Corp.; (800) 442-2406; www.crimsontrace.com
Model: LTG-760 Lightguard
Power: one, CR2 lithium battery; two-hour runtime
Output: 100 lumens
Weight: 1.5 ozs.
Material: polymer
Suggested Retail Price: $149 (Glock, Springfield and Smith & Wesson); $199 (M1911)

Latest

Dead Air Rxd910ti Suppressor F
Dead Air Rxd910ti Suppressor F

"9 mm Optimized, But 10 mm Capable:" Dead Air's New RXD910Ti Suppressor

The new Dead Air RXD910Ti harnesses the technology of the patented Triskelion baffle system to make for a 9 mm-optimized silencer that is also capable for use with 10 mm pistol cartridges and more.

Revisiting A World War II Marine’s Story

Secretary of War Pete Hegseth, in his speech to 800 assembled generals, admirals and senior enlisted at Quantico, Va., on Sept. 30, 2025, quoted Eugene Sledge from his timeless classic With The Old Breed published in 1981.

Review: Leupold Rendezvous Soft Cases

Looking for something better than a cheap nylon bag, but don’t need it armored for air travel? Leupold has you covered.

Preview: Hiperfire Hipertrain

Hiperfire’s Hipertrain is a cast aluminum housing into which the AR-style trigger system, safety selectors and pistol grip of the user’s choice (none of which are included) can be installed to create a trigger demonstrator/dry-fire trainer

New For 2026: Kimber 2K11 Comp

Kimber increased its 2K11 product line with the addition of two models with single-port compensators.

AR-15 vs. Bullpup Rifles: Which One Is Right For You?

Though bullpup-style rifle designs have become popular elsewhere in the world, they aren't nearly as popular with the American shooting public as the ubiquitous AR-15.

Interests



Get the best of American Rifleman delivered to your inbox.