Rifleman Q & A: 7.65 mm Or .32 ACP?

by
posted on December 13, 2017
** When you buy products through the links on our site, we may earn a commission that supports NRA's mission to protect, preserve and defend the Second Amendment. **
765.jpg

Q: I have a German 7.65 mm Browning-chambered Ortgies semi-automatic pistol, and when using .32 ACP cartridges (as local dealers recommend) it tends to jam after shooting three to five rounds. The jamming appears to be at the time of ejection of a spent case. My question is: Are .32 ACP cartridges really the same as 7.65 mm Browning or is there a slight difference? If so, where can I purchase 7.65 mm ammunition, as no one locally supplies true 7.65 mm, and places like Sportsman’s Guide or Cabela’s, etc., don’t handle that exact cartridge either?

A: While the .32 ACP and 7.65 mm Browning cartridges are dimensionally identical, some early European ammunition was loaded to slightly higher pressures, which can cause a problem similar to yours. The best way to address that is at the gun. First, I would make sure it is clean and well-lubricated. Then, if the problem persists, contact Wolff Gunsprings at (800) 545-0077 or at gunsprings.com. The company is very knowledgeable and should be able to suggest a reduced-power mainspring.

—Charles E. Petty

Latest

Springfield Armory Hellcat .380
Springfield Armory Hellcat .380

Review: Springfield Armory Hellcat .380 Pistol

Springfield Armory just released its popular Hellcat double-stack, striker-fired pistol in .380 ACP, and it might be an ideal option for armed citizens looking for a soft-shooting handgun for concealed carry.

New for 2026: Langdon Tactical Technology Beretta Cheetah Pistol

Beretta's .32 ACP Cheetah gets the Langdon Tactical upgrade package.

The Armed Citizen® Feb. 16, 2026

Read today's "The Armed Citizen" entry for real stories of law-abiding citizens, past and present, who used their firearms to save lives.

SAAMI Accepts and Standardizes Two New Cartridges

Both 8.6 Blackout and .25 Weatherby RPM are now SAAMI-approved cartridges.

Preview: Inforce ARC 650 LR-M

Measuring 5.6 inches long with a 1.4-inch bezel, the Inforce 650 LR-M is built for hard use within a 6061-T6 aluminum body that is then Type III hardcoat anodized for added durability and abrasion resistance.

A vz. 61 Skorpion For Less: The Titus Arms TA61

This TA61 version of the famous Czech vz. 61 Skorpion is affordably priced, thanks to a polymer lower receiver developed by Titus Arms.

Interests



Get the best of American Rifleman delivered to your inbox.