U.S. M1917 Vs. British Pattern 13 Bayonets

by
posted on April 8, 2014
** When you buy products through the links on our site, we may earn a commission that supports NRA's mission to protect, preserve and defend the Second Amendment. **
MG_36972.jpg

This U.S. M1917 bayonet came to us in a British P’13 scabbard. Typical M1917 markings include the maker’s name, a U.S. Ordnance eagle and the date of manufacture on the ricasso. The M1917 bayonet was standard-issue with the M1917 rifle, as well as U.S. “trench” shotguns.

 Q. I have one of the new replica Model 97 “trench” shotguns and have been looking for a bayonet to go with it. I haven’t been able to find a Model of 1917 bayonet for less than $150, but a friend seemed to recall I could put some kind of British bayonet on the gun. Do you know what he’s talking about?

A. In 1913, the British adopted the Pattern 13 rifle in .276 to replace the Short, Magazine, Lee-Enfield, but World War I broke out before they could get the rifle and new cartridge into production. Apparently, switching cartridges during a major war was considered a bad idea, so the design was adapted to the .303 British cartridge and approved on October 22, 1914. The British contracted with Winchester, Remington and Eddystone in the United States to produce .303 Pattern14 rifles. Winchester and Remington (but not Eddystone) also produced Pattern 13 sword bayonets with 17” blades to go with them. About 1.5 million were produced.

When the United States entered World War I, the P'14 design was adapted to the .30’-06 Sprg. cartridge and production resumed at all three facilities as the U.S. Model of 1917 Rifle. The U.S. M1917 bayonet was adopted at the same time, and it was identical to the P’13 bayonet, except for the U.S. Ordnance and acceptance markings and the addition of a clearance hole in the pommel. Also, more than 500,000 P’13 bayonets were purchased from the British and re-stamped with U.S. markings. When the United States adopted the 1897 Winchester and other “trench” shotguns, Springfield Armory and Winchester engineers devised ventilated metal handguard and bayonet-lug assembly that would accept an M1917 bayonet.

The method of attachment to the rifles was the same, but the scabbards differed in the manner they were fitted to the soldier’s web belt. The P’13’s scabbard had a lug that slid into a separate frog for the British Pattern 1908 Infantry Equipment. For the M1917, a brass hanger was attached to the top rear that slid into eyelets on the bottom of the American M1910 Infantry Equipment belt.

These days, U.S. M1917 bayonets command a premium over the P’13 bayonets, even though about 2.5 million M1917 bayonets were made. We recently ordered a P’13 bayonet for $49.95 plus a $5 handpick fee and shipping from Southern Ohio Gun (Dept. AR, P.O Box 590, Lebanon, OH 45036; (800) 944-4867; www.southernohiogun.com) and found its P’13 scabbard contained a Remington-made U.S. M1917 bayonet. Obviously, we lucked out, but a P’13 should work for your purposes.

- Mark A. Keefe, IV

Originally published June, 2006

Latest

.308 Win.
.308 Win.

Handloads: A Quiet .308 Win. For Large-Format Pistols

Of the many commercial .308 Winchester loads, few, if any, are designed for barrels shorter than 16". The one that follows helps address this gap while remaining simple to suppress and light on the wrists.

Court Approves Watchtower Firearms DIP Financing

Watchtower Firearms was granted final approval for debtor-in-possession (DIP) financing by the U.S. Bankruptcy Court for the Northern District of Texas in late June.

Review: Ruger LC Carbine In 10 mm Auto

Following the success of its .45 ACP-chambered LC Carbine, Ruger realized that this platform would go a long way toward making the 10 mm Auto more controllable and fun to shoot, and a new 10 mm version was released in 2024.

The Armed Citizen® July 14, 2025

Read today's "The Armed Citizen" entry for real stories of law-abiding citizens, past and present, who used their firearms to save lives.

Favorite Firearms: A Little Stevens From Chicago

"Over the next five or six years, and before I went off to college, I fired hundreds and hundreds of rounds of .22 BB Caps, CB Caps, Shorts and Longs through this rifle."

Preview: Strike Industries T-Bone Charging Handle

The T-Bone from Strike Industries is an ideal fit for suppressed applications, as it can be configured by the user to redirect gas blowback entirely to either side ...

Interests



Get the best of American Rifleman delivered to your inbox.