Heckler & Koch P2000

by
posted on May 19, 2009
2010318105531-handkp2000_fs.jpg

Produced as a duty gun for a German police agency, the Heckler & Koch P2000 is a light, slim and fully ambidextrous polymer-frame pistol. The only catch is that its long and heavy double-action-only trigger pull―a system H&K calls the Law Enforcement Modification or LEM-is not conducive to practical accuracy.

In response to consumer desire for a more precise trigger, H&K introduced a double-action/single-action P2000 variant at the 2005 SHOT Show. Sharing the same nomenclature as the USP family of pistols, the gun was called the P2000 Variant 3. But unlike the rest of the USP family, the V3 is a dedicated double-action/single-action pistol that cannot be retrofitted with the LEM trigger system.

A quick look at the V3 reveals that H&K dropped the familiar side-mounted USP decocker/safety lever in favor of a decocker mounted on the left rear of the frame next to the hammer. More a button than a lever, this decocker precludes any levers that could hang up on clothing and increase the thickness of the gun. More importantly, the gun still remains totally ambidextrous. You simply reach back with the weak hand and decock the gun with a press of the button. As unwieldy and unusual as the decocker looks, it's simple to master.

The gun is built around a polymer frame and weighs a scant 23 ounces. In lieu of the proprietary H&K rail found on USP pistols, the dustcover has a more sensible Picatinny rail for illumination accessories. The stippling is molded into panels on the P2000's front and backstraps, but it is not nearly as aggressive as the USP's diamond-point checkering. A matte-black nitro-carburized finish H&K calls Hostile Environment is applied to the slide and other metal parts.

Disassembly is simple. Just drop the magazine and align a square notch on the left side of the all-steel, machined slide with the slide-release lever, and pry the lever away from the frame. The slide, barrel and guide rod/recoil spring assembly come off, and the left-hand slide-release lever comes out of the frame. The right-hand lever stays attached to the frame. The pistol utilizes the Browning linkless design found on so many semi-autos these days, with one additional feature. A polymer, recoil-absorbing bushing rides up and down the steel guide rod. This bushing is found in both the P2000 and USP compact pistols.

The barrel is 3 5/8 inches long and features polygonal rifling. The pistol is a trim 7-inches long and stands just over 5-inches tall. Dovetailed into place, the sights are the traditional three-dot pattern and have a low profile. Tritium night sights are optional.

Total thickness of the gun in the three calibers offered - 9x19 mm .357 SIG and .40 S&W-is 1 1/3 inches. The magazine-release extends out of both the left and right sides of the oversized trigger guard and drops the magazine when swept downward.

The P2000 comes with four backstraps (small, medium, large and extra large) to reduce the need for slip-on grips or expensive fill-and-grind jobs. Simply punch out a roll pin and replace the backstrap with one that best fits your hand. The backstraps slide in the frame via a full-length vertical dovetail that eliminates any play or wiggle.

Where this pistol shines is on the range. Our sample pistol was chambered for .40 S&W, and function firing yielded brisk recoil with heavy 180-gr. loads but manageable recoil with 165- and 155-gr. loads. Five, five-shot groups fired for accuracy at 25 yards averaged 2.47 inches with Remington's 165-grain Golden Saber jacketed hollow points. The pistol is quick to the target and points well for those who prefer the more aggressive grip angles of modern designs.

The first shot heads downrange after a 10-pound trigger pull, and subsequent rounds are released after a sweet single-action pull of just 4 pounds. It was a delight to cock the hammer and hit falling plates at extended distances instead of fighting through a long double-action trigger pull.

So what's the big deal about the single-action option in a carry gun? Many would argue that consistency is the key, but a dire situation could demand pinpoint accuracy. The P2000 V3 has a desirable blend of accuracy and controllability that make it ideal for service, sport or licensed carry.

Manufacturer: Heckler & Koch, Germany
Importer: Heckler & Koch, Inc.; (703) 450-1900; www.hk-usa.com
Caliber: 9x19 mm, .357 SIG, .40 S&W (tested)
Action Type: short-recoil-operated semi-automatic pistol
Frame: fiberglass-reinforced black polymer
Barrel: 3 5/8" chrome-moly steel
Rifling: six-groove polygonal 1:16"
Magazine: 12-round, detachable box (14-round capacity for 9x19 mm and .357 SIG)
Sights: rear notch and front post align three white dots, drift-adjustable for windage
Trigger pull: double-action (9-lbs. pull)/single-action (4-lbs. pull)
Overall Length: 7"
Width: 1 1/3"
Height: 5"
Weight: 23 ozs.
Accessories: four replaceable backstraps, two magazines, lockable carry case
Suggested Retail Price: $887

Latest

Lonewolf Slide Horman
Lonewolf Slide Horman

Review: Lone Wolf's Alphawolf Caliber-Conversion Slides 

For owners of .40 S&W-chambered Glocks, Lone Wolf's Alphawolf caliber-conversion slides are an easy way to update the design.

Vista Outdoor Advises MNC Capital To Increase Offer Price

Vista Outdoor announced discussions with MNC Capital (MNC), the company that made a $2.9 billion unsolicited offer earlier this year.

Rifleman Review: Taurus G3 Tactical

In recent years, Taurus has fully fleshed out its polymer-frame, striker-fired pistols, culminating in the third-generation G3 series available in several configurations. One of the more-recent introductions in the line is the G3 Tactical, which incorporates a number of desirable features.

Winchester Engages Members Of Congress

Winchester Ammunition recently hosted legislators and outdoor industry representatives at a special event in Washington, D.C.

New For 2024: PTR Industries PTR 63

PTR Industries, known for its roller-delayed platforms, has a new 5.56 NATO-chambered model out for 2024 that takes STANAG magazines. Here are the details on the company's new PTR 63.

Montana Rifle Co. Re-Opens Under New Ownership

Grace Engineering Corp., based in Memphis, Mich., announced it has acquired the assets and rights of Montana Rifle Co., which closed its doors in 2020 after more than 20 years in business.

Interests



Get the best of American Rifleman delivered to your inbox.