This Old Gun: British Pattern 1801 Sea Service Pistol

by
posted on January 27, 2016
** When you buy products through the links on our site, we may earn a commission that supports NRA's mission to protect, preserve and defend the Second Amendment. **
seaservice.jpg

Being an island nation, Great Britain has relied heavily on her naval prowess for protection and survival. More than once, English ships came to the rescue and staved off imminent invasion. 

Aside from defeating the Spanish Armada in 1588, Britain’s most famous maritime feat was probably the thrashing it gave the combined French and Spanish vessels at the Battle of Trafalgar in 1805. Despite the tragic loss of England’s premier sailor, Vice Admiral Horatio Nelson, this decisive engagement ended France’s threat on the high seas for the remainder of the Napoleonic Wars.

It’s usually accepted that in the age of fighting sail ships, combatants traditionally pounded one another to pieces firing broadsides with their cannons and carronades at a distance until the enemy surrendered or was sunk. Actually, many battles were settled with superior seamanship and personal combat. No lesser an authority than Nelson himself coined the axiom, “No captain can do very wrong if he places his ship alongside that of the enemy.”

This meant that a variety of small arms, such as cutlasses, pikes, muskets and pistols, were normally carried in ships’ stores for use in close work when alongside, boarding or during the frequent shore patrols and forays in which naval personnel were routinely called upon to engage in close combat.

The Pattern 1801 Sea Service pistol was one of the most widely manufactured of British handguns during the Napoleonic period. Like the “Brown Bess” musket—which underwent various modifications and facelifts during its more-than-100-year lifespan but still maintained its basic character—the 1801 was not all that changed from the Pattern 1716 and Pattern 1716/1777 Sea Service pistols from which it was derived.


This was a serious hunk of handgun. Possessed of a robust, flat, India-pattern flintlock mechanism, caliber was .56, and its smoothbore barrel measured 12". Sporting a full-length walnut stock and brass furniture, overall length was 19¼". Steel parts were left in the bright. On the left side of the gun, a 7½"-long belt hook was firmly affixed over the sideplate via a pin and the rear lock screw (“sidenail”). This accessory, not seen on similar-appearing Land Service pistols, allowed Jack Tar to secure the pistol to his belt, crossbelt or sash before and after he had fired its single shot.

Reloading during a melee was usually not possible, and while it is customary to assume the pistol, because of its substantial rounded buttcap, could also be used as a bludgeon, this was normally not the case as the practice was rough on the hardware and a cutlass was a much better tool for hand-to-hand combat. The pistols were loaded using prepared paper cartridges containing a round lead bullet and powder for priming and the main charge.

The 1801 here is in excellent condition and is typical of its type, with stamped (rather than engraved) lock markings and a “storekeeper’s mark” dating the gun to 1806. Despite their age, these pistols do turn up with some regularity on the collector market. If complete and in good shape, $2,800 is a very fair price for one.

Gun: Pattern 1801 Sea Service pistol
Manufacturer: Various contractors. Assembled at the Tower of London Armoury
Caliber: .56
Condition: NRA Excellent (Antique Gun Standards)
Manufactured: 1806
Value: $2,850

Latest

Federal 7Mm Backcountry Rifleman Review 1
Federal 7Mm Backcountry Rifleman Review 1

Rifleman Review: Federal 7 mm Backcountry

Unlike other recent cartridge launches, the key to Federal Ammunition's 7 mm Backcountry wasn't just in the design of the cartridge but also the type of material used in its case construction.

Big Bite in a Small Package: The Henry Repeating Arms Bear's Leg

Henry Repeating Arms is stepping up its lever-action game with the addition of its Bear's Leg design, a tactical lever-action that provides power and versatility in a compact platform.

I Have This Old Gun: French Model 1777 An IX

French Charleville muskets are a fascinating study in improvement, having evolved from a loosely uniform pattern to what was likely the first military longarm with truly interchangeable parts.

NRA CEO/EVP Doug Hamlin Talks Politics, the NRA, and the Future of Our Freedom

In this interview with The Armed Citizen Podcast at the 155th NRA Annual Meetings & Exhibits in Houston, Texas, NRA Executive Vice President and CEO Doug Hamlin talks about what is going on with the NRA, the many battles for our freedom around this nation the NRA is involved in, and what’s to come.

Best of the Best: American Rifleman's 2026 Golden Bullseye Award Winners

From firearms to accessories to optics to ammo and suppressors, we’ve determined these to be the stand-out products from the last year, providing firearm enthusiasts with innovation, value, utility and performance.

Review: Diamondback 9 mm SDR

Folks might be a bit surprised that Diamondback would choose 9 mm as the second caliber for its SDR revolver, but a closer look reveals why 9 mm is a solid caliber option for the platform.

Interests



Get the best of American Rifleman delivered to your inbox.