NEW! Ruger Gunsite Scout Rifle .223 Rem./5.56 NATO

by
posted on September 8, 2014
** When you buy products through the links on our site, we may earn a commission that supports NRA's mission to protect, preserve and defend the Second Amendment. **
rugerscout223_range.jpg

Ruger has announced that it has adapted the original .308 platform of its Gunsite Scout Rifle to .223 Rem./5.56 NATO caliber. The rifles are available for immediate delivery.

The rifle weighs approximately 7.1 lbs., features a 16.1", 1/2-28 threaded barrel with a 1:8" twist rate, offers controlled round feed and is shipped with a 10-round detachable box magazine.

"This is a natural extension of the Gunsite Scout Rifle line," said Gunsite Instructor Ed Head, one of the contributors to the original Ruger Gunsite Scout Rifle design. "Being chambered in a lower cost, universally available caliber, and with the Ruger reputation for reliability and accuracy, this is another serious rifle for those serious about rifles," he added.

The cold hammer-forged, medium contour, alloy steel barrel and receiver feature a matte black oxide finish. The 1/2-28 threaded barrel comes with a Ruger flash suppressor, which can be removed in order to attach other threaded barrel accessories. The rifle's trigger guard and magazine well are formed of glass-reinforced nylon. The magazine release is a push-forward Mini-14 paddle just ahead of the trigger guard.

A Mini-14-style protected, non-glare, post front sight and receiver-mounted, adjustable, ghost ring rear sight offer out-of-the-box usability. A forward-mounted Picatinny rail offers options in mounting an assortment of optics such as scout scopes. The rifle also features Ruger M77 integral scope mounts and comes with Ruger scope rings for conventional scope mounting.

The weather resistant black laminate stock, with "Gunsite Scout Rifle" engraved on the grip cap contains sling swivel studs and a checkered grip and forearm. A soft rubber recoil pad with three 1/2" spacers allows the length of pull to be adjusted and properly sized for different shooters or to give the shooter the proper fit with outerwear or defensive gear of varying thickness.

The Ruger Gunsite Scout Rifle was introduced in 2011 as a response to the late Jeff Cooper's postulation about building one singular rifle with which to perform most necessary tasks. In the American Rifleman review, Ruger Product Manager Mark Gurney says, “The Ruger Gunsite Scout is a credible rendition according to Cooper’s concepts. It is not an attempt to blindly follow a strict recipe, because Cooper didn’t have a strict recipe. He had guidelines based upon an ideal, and Ruger and Gunsite followed those ideals as best we could while keeping costs and development time reasonable.

Thus this "recipe approach" has kept the door open for modifications like the one announced today. To learn what Ruger did to the box magazine and bolt to accommodate this new caliber introduction, check out the photo gallery and watch the video as American Rifleman Senior Executive Editor Brian Sheetz walks through its features and then takes the gun downrange.

Latest

Stuart 45 Pistol Pre War Manuevers Web Main
Stuart 45 Pistol Pre War Manuevers Web Main

Guns Of The U.S. Tankers In World War II

Since the end of World War II, debates have raged about the effectiveness of American armored fighting vehicles in that conflict. Despite all the Monday morning armored quarterbacking, American AFVs were war-winners, driven to victory by some the finest fighting men our nation has ever produced.

MidwayUSA Foundation Awards Over $14 Million In Cash Grants In 2025

In honor of National Shooting Sports Month—held annually in August—along with the growing popularity of the sport with new participants, MidwayUSA Foundation announced it has distributed more than $14.2 million in cash grants to support youth shooting sports in 2025.

Making The KelTec PR57 In Wyoming

To make its PR57 handgun, KelTec invested in an entirely new manufacturing facility located in Rock Springs, Wyo. "American Rifleman Television" headed out for an inside look at the company's efficient production process.

Taurus 66 Combat: A New "Fighting Revolver"

First introduced in the 1970s, the Taurus 66 Combat is a medium-frame revolver that has seen several evolutions in its lifetime, and the latest update creates what the company considers "the final word in fighting revolvers."

Review: Taurus GX2

From cars to cellphones, as a product gets more sophisticated, it usually also gets more expensive. And, as modern handguns get more modular and optic-ready, their prices tend to go up.

Rifleman Q&A: A Garand Puzzlement

"We are a father-and-son NRA member tandem in search of an answer regarding the branding of an M1 Garand rifle. We own an M1 rifle that has markings indicating it was a “lend lease to England,” and it also has a .308 barrel/sleeve."

Interests



Get the best of American Rifleman delivered to your inbox.