I Have This Old Gun ... Walther PPK/S

oldwalther.jpg

Ironically, if it weren’t for the Gun Control Act (GCA) of 1968 we would not have the Walther PPK/S, a moderately elongated version of the PPK (Polizei Pistole Kriminalmodell, “Police Pistol Detective Model”), introduced in 1931. With its compact design, the PPK was a trendsetter for today’s influx of double-action/single-action pocket pistols.

The PPK was a slightly smaller version of the Walther PP (Polizei Pistole, “Police Pistol”), which had a barrel length just under 4" and a magazine capacity of seven rounds. The PPK, by comparison, had a 313" barrel and a six-round magazine with a separate bottom finger rest to augment the shorter length. Both guns were chambered in .32 ACP and .380 ACP, and later .22 Long Rifle, and they shared innovations such as a safety/decocking lever, hammer block safety and loaded-chamber indicator. The .32 ACP and .380 ACP pistols were adopted by the German military and police.

The PPK in .32 ACP was also the gun author Ian Fleming chose to arm his fictional super-spy, James Bond; it first appeared in the fifth Bond novel, Dr. No (previously, Bond carried a slightly less-lethal .25 ACP Beretta 418). The PPK stayed with Bond throughout the novels and movies, even making an appearance as a PPK/S in the latest Daniel Craig flick, “Spectre” (although the actor has a professed “hate” of handguns).

With firearm manufacturing prohibited in Germany after World War II, from 1952 to 1986 Walther licensed PP and PPK production to Manufacture de Machines du Haut-Rhin (Manurhin) in France, with Interarms of Alexandria, Va., as the U.S. importer. Nonetheless, the 1968 GCA found the PPK a tad too small to qualify for importation. Walther’s solution was ingenious in its simplicity; the company put the shorter PPK barrel and slide on the slightly larger PP receiver. This combination—dubbed the PPK/S—was almost as compact as the PPK, but had the extra-round capacity of the PP. It was the best of both worlds.


The blued, 90 percent PPK/S shown here (brushed nickel finishes also exist) is an example of the all-French version, proofed at St. Etienne (most Manurhin guns were assembled, proofed and marked as such in West Germany), and is complete with plastic case, instructions, test target and three magazines with finger extensions removed. Although the slide bears blemishes of minor surface rust cleaning, this PPK/S would easily fetch $750-$950 by anyone seeking a solid example of this self-defense gun, a design that has withstood the test of time.

Gun: Walther PPK/S
Manufacturer: Manurhin (note: parts made by Manurhin in France and assembled in Ulm, West Germany, are more plentiful)
Chambering: .380 ACP (9 mm Kurz)
Serial No: 252XXXS
Manufactured: 1981
Condition: NRA Very Good-Plus (Modern Gun Standards)
Value: $750 to $950 (including original box, paperwork and magazines)

Latest

Walther Ronin Dyal
Walther Ronin Dyal

Arming My Daughter Part II: Sampling Mid-Size Nines

As I went through all of the data for the previous article, now Part I, I saw how my daughter Laney struggled with micro 9s, so a natural question jumped out: How would she do with a larger 9 mm handgun?

Hornady Inducted To Nebraska Business Hall Of Fame, Announces Park Management

Industry legend Hornady is already experiencing a big year. On Feb. 1, for example, the Hornady family was inducted into the Nebraska Business Hall of Fame at the annual NE Chamber Hall of Fame Banquet held in Lincoln, Neb.

I Have This Old Gun: Burnside Carbine

In the American Civil War, there was an incredible variety of small arms used, particularly within cavalry units. One of the most popular cavalry carbines used throughout the war was the Burnside carbine.

New For 2024: Mossberg Patriot 400 Legend

Mossberg expanded its Patriot bolt-action rifle line to encompass one of the newest straight-wall hunting cartridges on the market: 400 Legend.

I Have This Old Gun: Norinco 84S

The Norinco 84S presents the same general appearance as the Chinese-made 56S because it has the same overall length, is built around a stamped sheet-steel receiver and uses the same hooded front sight base, the same 45-degree gas block, the same fire-control components, the same wood furniture and the same high-polish blued finish.

Rifleman Q&A: Boattail Bullets And Barrel Erosion

In the recent spate of “long-range” boattail bullets presented to the market, I’ve observed the boattail’s degree of departure from the bullet’s cylindrical axis varies substantially from one design to another.

Interests



Get the best of American Rifleman delivered to your inbox.