Review: Remington R-15 Varmint

by
posted on June 17, 2009
** When you buy products through the links on our site, we may earn a commission that supports NRA's mission to protect, preserve and defend the Second Amendment. **
200961710430-r15varmint_fs.jpg

The new Remington R-15 rifle is designed from the ground up for varmint and predator hunting. With Remington, Bushmaster, DPMS and Cobb Mfg. now owned by parent company Cerebus, the introduction of an AR-based Remington sporter wasn’t a complete surprise, but a pleasant one nonetheless.

The Remington R-15 line includes three variants—a 22-inch-barreled varmint rifle and two 18-inch-barreled predator carbines. All three are available in either .223 Rem. or .204 Ruger. We received the full-size R-15 Varmint Rifle chambered in .204 Ruger in Realtree Advantage Max-1 HD camouflage finish, which combines neutral earth tones with prairie grass, sage and brush motifs. The upper and lower receivers as well as the fore-end and the buttstock are coated with this finish, while the barrel, gas block, ejection port cover, pins and controls all feature a matte black.

Accuracy is key with any varmint rifle, and the R-15 is designed to deliver in that department. The 22-inch button-rifled, free-floated barrel is made from chromium-molybdenum steel and features a 0.68-inch external diameter. Forward of the gas block, the barrel’s six longitudinal flutes aid in heat dissipation and reduce weight. The muzzle has a recessed crown. The machined aluminum fore-end has subtle knurling around its diameter. It also has eight cooling vents to help dissipate barrel heat. The forward portion of the fore-end is drilled and tapped to accept two short sections of Picatinny rail, allowing the user to easily mount accessories, such as lights, lasers, etc. The bottom of the fore-end is also drilled and trapped to accept two sling swivel studs, allowing for attachment of a bipod and a sling.

The R-15 employs a specially designed single-stage trigger with a shorter and somewhat lighter trigger pull than most two-stage units. The test rifle’s trigger broke at 6¾ pounds.

The R-15 Varmint employs a flattop receiver with a strip of Picatinny rail machined directly into the top of the upper receiver and no iron sights. This is in recognition of the fact that most varmint hunters will immediately mount high-magnification optics on the rifle. The rifle can also accept all standard AR-style aftermarket accessories and parts. Internally, the R-15 is a traditional AR-style rifle, employing a direct gas impingement system.

The controls should be familiar to anyone who has previously fired an AR-style rifle. Although the rifle comes equipped with a five-round magazine, any standard AR-15/M16 magazine can be employed. The upper receiver’s right side has all the familiar AR components, including a forward assist, an ejection port cover and a shell deflector to keep brass from harassing a left-handed shooter.

The fit and finish was extremely good, with the camouflage finish evenly applied and attractive. The matte-black finish on the barrel, gas block, pins and controls is also attractively applied. The upper and lower receivers of the rifle were mated well, with little to no play between them, and the action cycled smoothly. All the controls, such as the safety lever, magazine release and bolt release, worked well.

When it comes to handling, the R-15 is ideal for varmint hunting. Designed to be fired from the bench or prone at long-range targets, the rifle’s 7¾-pound weight balanced well just forward of the magazine. The full-profile, A2-style stock was also quite comfortable, allowing for a good cheek weld.

For accuracy testing, we topped off the rifle with a Burris Fullfield II 6.5-20x50 mm scope with Warne Maxima quick-detach, ultra-high rings. During the course of firing several hundred rounds, the rifle performed well, but with an odd occurrence. When using the Federal V-Shok 32-gr. Nosler Ballistic Tip ammunition, there were two instances in which the bolt did not fully seat. A simple push of the forward-assist button moved the bolt forward a fraction of an inch and fully seated the action. There were no such occurrences with the Remington or Winchester ammunition.

The rifle showed a distinct preference for lighter-weight bullets, faring better with the two 32-gr. loadings than with the single 40-gr. loading. In fact, with the two lighter bullet weights, many of the groups came in under one inch at 100 yards. Recoil was light and pleasant, which should come as no surprise considering the rifle’s 7¾-pound weight and diminutive .204 Ruger chambering.

With its new R-15, Remington is signaling that it recognizes what many shooters and sportsmen have long known—that the ever-popular AR rifle has just as much utility in the hunting realm as it does in the tactical one.

Latest

Gotw Tristar Arms Kr22 1
Gotw Tristar Arms Kr22 1

Gun of the Week: TriStar Arms KR.22

Semi-automatic .22 rifles have been a staple in the firearm marketplace for decades, and the TriStar Arms KR.22 brings yet another lightweight, affordable option that accepts Ruger 10/22 rotary magazines.

Political Report | Trump Reiterates National Right-to-Carry Support

I am repeatedly reminded of how critical it was that the NRA engaged early in supporting Donald Trump’s 2016 candidacy—and that he won. A recent example came in June, when President Trump spoke to American workers at a Mack Trucks facility in Macungie, Pa.

The Armed Citizen® Aug. 21, 2026

Read today's "The Armed Citizen" entry for real stories of law-abiding citizens, past and present, who used their firearms to save lives.

The Norinco TU-33/40: A Rimfire Mauser Lookalike from China

The Norinco TU-33/40 is, at a glance, a copy of a Mauser 98k with a few choice details that give away the fact that it’s not a big-bore World War II workhorse.

AI Tools Enter the Used-Gun Market

Companies that deal in the used-gun market are not shy about sharing the advantages their AI-driven tools and services.

Standing Guard | Standing on the Line for Freedom

This past August marks 46 years since I raised my right hand and was commissioned as an infantry officer in the United States Marine Corps. In the summer of 1980, I entered active duty with a firm sense of civic duty and a deep desire to serve our great nation. Like so many who wear the uniform, I was ready to contribute directly to the defense of freedom.

Interests



Get the best of American Rifleman delivered to your inbox.