Review: Remington R-15 Varmint

by
posted on June 17, 2009
200961710430-r15varmint_fs.jpg

The new Remington R-15 rifle is designed from the ground up for varmint and predator hunting. With Remington, Bushmaster, DPMS and Cobb Mfg. now owned by parent company Cerebus, the introduction of an AR-based Remington sporter wasn’t a complete surprise, but a pleasant one nonetheless.

The Remington R-15 line includes three variants—a 22-inch-barreled varmint rifle and two 18-inch-barreled predator carbines. All three are available in either .223 Rem. or .204 Ruger. We received the full-size R-15 Varmint Rifle chambered in .204 Ruger in Realtree Advantage Max-1 HD camouflage finish, which combines neutral earth tones with prairie grass, sage and brush motifs. The upper and lower receivers as well as the fore-end and the buttstock are coated with this finish, while the barrel, gas block, ejection port cover, pins and controls all feature a matte black.

Accuracy is key with any varmint rifle, and the R-15 is designed to deliver in that department. The 22-inch button-rifled, free-floated barrel is made from chromium-molybdenum steel and features a 0.68-inch external diameter. Forward of the gas block, the barrel’s six longitudinal flutes aid in heat dissipation and reduce weight. The muzzle has a recessed crown. The machined aluminum fore-end has subtle knurling around its diameter. It also has eight cooling vents to help dissipate barrel heat. The forward portion of the fore-end is drilled and tapped to accept two short sections of Picatinny rail, allowing the user to easily mount accessories, such as lights, lasers, etc. The bottom of the fore-end is also drilled and trapped to accept two sling swivel studs, allowing for attachment of a bipod and a sling.

The R-15 employs a specially designed single-stage trigger with a shorter and somewhat lighter trigger pull than most two-stage units. The test rifle’s trigger broke at 6¾ pounds.

The R-15 Varmint employs a flattop receiver with a strip of Picatinny rail machined directly into the top of the upper receiver and no iron sights. This is in recognition of the fact that most varmint hunters will immediately mount high-magnification optics on the rifle. The rifle can also accept all standard AR-style aftermarket accessories and parts. Internally, the R-15 is a traditional AR-style rifle, employing a direct gas impingement system.

The controls should be familiar to anyone who has previously fired an AR-style rifle. Although the rifle comes equipped with a five-round magazine, any standard AR-15/M16 magazine can be employed. The upper receiver’s right side has all the familiar AR components, including a forward assist, an ejection port cover and a shell deflector to keep brass from harassing a left-handed shooter.

The fit and finish was extremely good, with the camouflage finish evenly applied and attractive. The matte-black finish on the barrel, gas block, pins and controls is also attractively applied. The upper and lower receivers of the rifle were mated well, with little to no play between them, and the action cycled smoothly. All the controls, such as the safety lever, magazine release and bolt release, worked well.

When it comes to handling, the R-15 is ideal for varmint hunting. Designed to be fired from the bench or prone at long-range targets, the rifle’s 7¾-pound weight balanced well just forward of the magazine. The full-profile, A2-style stock was also quite comfortable, allowing for a good cheek weld.

For accuracy testing, we topped off the rifle with a Burris Fullfield II 6.5-20x50 mm scope with Warne Maxima quick-detach, ultra-high rings. During the course of firing several hundred rounds, the rifle performed well, but with an odd occurrence. When using the Federal V-Shok 32-gr. Nosler Ballistic Tip ammunition, there were two instances in which the bolt did not fully seat. A simple push of the forward-assist button moved the bolt forward a fraction of an inch and fully seated the action. There were no such occurrences with the Remington or Winchester ammunition.

The rifle showed a distinct preference for lighter-weight bullets, faring better with the two 32-gr. loadings than with the single 40-gr. loading. In fact, with the two lighter bullet weights, many of the groups came in under one inch at 100 yards. Recoil was light and pleasant, which should come as no surprise considering the rifle’s 7¾-pound weight and diminutive .204 Ruger chambering.

With its new R-15, Remington is signaling that it recognizes what many shooters and sportsmen have long known—that the ever-popular AR rifle has just as much utility in the hunting realm as it does in the tactical one.

Latest

Windham
Windham

Windham Weaponry Back In Business

On April 19, Windham Weaponry announced it is back in business, although a company spokesman confirmed the effort to re-open began Jan. 1.

Rifleman Report: “Piles Of Guns”

While sport shooting and hunting are still undertaken in many countries around the world, our staffers don’t often have the opportunity to test new guns in places as far away and mystical as Australia, but that’s exactly where Executive Editor Evan Brune went with the new rifle that is the subject of this month’s cover story.

Preview: Sticky Holsters Optics Ready

Sticky Holsters now offers versions of its holsters with a trimmed down front edge that accommodates a slide-mounted micro red-dot.

Affordable Powerhouse: EAA 10 mm Witness2311

Harnessing the power of the 10 mm Auto in a compact format with generous capacity, EAA’s Witness2311 is an affordable and shootable way to ride the current 10 mm wave.

The Armed Citizen® April 29, 2024

Read today's "The Armed Citizen" entry for real stories of law-abiding citizens, past and present, who used their firearms to save lives.

All The Way With The M1 Carbine

The speed with which the M1 carbine was developed and readied for quantity production is a striking tribute to the energy and patriotism of everyone involved.

Interests



Get the best of American Rifleman delivered to your inbox.