.223 Rem. vs. 5.56x45 mm NATO: Is It Safe?

by
posted on March 4, 2013
keefe2015_fs.jpg

I have received a slew of questions—many from first time AR-type rifle buyers—about the .223 Rem. and the 5.56x45 mm NATO cartridges. Can I shoot 5.56x45 mm NATO in my .223 and vice-versa? Are these the same cartridge?

Externally, the two cartridge cases are identical. The main differences are that 5.56x45 mm NATO operates at a higher chamber pressure (about 60,000 p.s.i. versus 55,000 p.s.i. on the .223 Rem.) and the 5.56’s chamber is slightly larger than that of the .223 Rem. Also, the throat or leade is longer in the 5.56x45 mm chamber. What does this mean? You should not shoot 5.56x45 mm NATO out of a rifle that is chambered in .223 Rem. And be aware that some .223 Rem. ammunition will not reliably cycle through some AR-style .223 Rem. rifles, but it usually does. As a matter of fact, I have not encountered any difficulty with current .223 Rem. loads cycling through a 5.56 mm AR-style rifle.

Generally, most AR-style rifles are intended to accept 5.56x45 mm NATO and are marked “5.56,” while some are marked “5.56/223.” In the case of an AR-style rifle marked “223”, check with the maker as it may actually have a 5.56 chamber. American Rifleman covered this topic at length with an article by Field Editor Bryce M. Towsley.

Latest

The Armed Citizen
The Armed Citizen

The Armed Citizen® September 20, 2021

Read today's "The Armed Citizen" entry for real stories of law-abiding citizens, past and present, who used their firearms to save lives.

Sniping In Korea: 1950-1953

When U.S. forces rushed to stop the North Koreans from overrunning South Korea in 1950, there were almost no American snipers. As the battle lines stabilized, that would change, and the war would become ideal for the employment of well-equipped and well-trained snipers.

Preview: Archangel Mosin Nagant OPFOR

Greatly improve the ergonomics and versatility of your old Russian workhorse with the Archangel Mosin Nagant OPFOR—one of the few replacement stocks on the market compatible with most variants of the storied bolt-action.

Rifleman Q&A: Bullet & Primer Sealant

From the archives of American Rifleman, one NRA member questions the importance of the colorful or black-colored paint-like coating around the cartridge necks and primer pockets of surplus ammunition.

Preview: Zero Tolerance Knives 0357BW

The U.S.-made Zero Tolerance 0357 Black Wash liner lock features a 3.25" blade of hard, wear-resistant CPM 20CV steel treated with a scratch-hiding blackwash finish best suited for everyday carry.

The French FR F2 Sniper Rifle

Conceived during the Cold War and after thirty years of service, the French are beginning to phase out the FR F2 bolt-action sniper rifle, with the surplus rifles available for sale from Navy Arms.

Interests



Get the best of American Rifleman delivered to your inbox.