Winchester Issues Warning, Recall for Super-X 17 HMR 20-gr. JHP Rimfire Ammunition

by
posted on September 13, 2019
** When you buy products through the links on our site, we may earn a commission that supports NRA's mission to protect, preserve and defend the Second Amendment. **
win_recall_lead.jpg

Olin Winchester has issued a press release announcing it is recalling two lots of rimfire ammunition. The release reads as follows:

"Olin Winchester, LLC is recalling two (2) lots of 17 HMR 20 Grain Jacketed Hollow Point Rimfire rifle ammunition.

Symbol X17HMR1
Lot Numbers (last four characters): NB51 and NB61

Winchester has determined the above lots of 17 HMR ammunition may contain no powder charges. Ammunition with no powder charges may result in a bullet remaining in the barrel (i.e., a bullet-in-bore obstruction). Firing a subsequent bullet into the bore obstruction could cause firearm damage, rendering the firearm inoperable and subjecting the shooter and bystanders to a risk of serious personal injury.

DO NOT USE WINCHESTER® 17 HMR 20 GRAIN JHP SYMBOL X17HMR1 THAT HAS A LOT NUMBER ENDING IN NB51 or NB61. The ammunition Lot Number is stamped on the top of the 1000-round case and the outside of the 50-round plastic box as indicated here.



To determine if your ammunition is subject to this notice, review the Symbol and Lot Number. If it is Symbol X17HMR1 and the last four characters of the Lot Number are NB51 or NB61, immediately discontinue use and contact Winchester toll-free at 844-653-8358 for free UPS pick-up of the recalled ammunition.

This notice applies only to Symbol X17HMR1 with Lot Numbers ending in NB51 and NB61. Other Symbols or Lot Numbers are not subject to this recall.

If you have any questions concerning this 17 HMR rimfire rifle ammunition recall, please call toll-free 844-653-8358, write to Winchester (600 Powder Mill Road, East Alton, IL 62024 | Attn: X17HMR1 Recall), or visit our website at winchester.com."

Latest

Rifleman Q&A
Rifleman Q&A

Rifleman Q&A: Point Of Hold

Q: I have always been a rifle and handgun shooter, with little shotgun experience, and I am a little confused about the “point of hold” shown in the pattern illustrations of our magazine.

Preview: MTM Case-Gard Suppressor Protector Case

Secure, rugged and inexpensive, the Suppressor Protector Case by MTM Case-Gard is a convenient way to transport or store as many as three (cooled) silencers up to 10" in length.

A Bigger Rhino: The Chiappa 60DS L-Frame In .44 Mag.

The Chiappa Rhino revolver design is "anything but ordinary," and for 2026, the company is upscaling the concept to handle the .44 Magnum cartridge.

Preview: Magpul MOE QD Bipod For M-Lok

Simple, inexpensive and supremely easy to use, the new MOE QD Bipod For M-Lok is Magpul’s fastest-mounting bipod model by far, as it takes only about five seconds for the practiced hand to securely affix it to an M-Lok-clad fore-end.

Gun Of The Week: Henry SPD HUSH

For its first design, Henry Repeating Arms' Special Products Division developed the HUSH, or the Henry Ultimate Suppressor Host. 

The Armed Citizen® Dec. 19, 2025

Read today's "The Armed Citizen" entry for real stories of law-abiding citizens, past and present, who used their firearms to save lives.

Interests



Get the best of American Rifleman delivered to your inbox.