Fear & Loading: Mission First Tactical Battlelink Utility Stock

by
posted on June 27, 2016
** When you buy products through the links on our site, we may earn a commission that supports NRA's mission to protect, preserve and defend the Second Amendment. **
sig_ar_stock_lead.jpg

One of the best things about AR-15s is the ability to quickly customize the configuration for different duties—whether it’s home-defense, punching paper at long distance or staying up with the pros at the next competition. That’s also one of the biggest drawbacks. Toss on enough gear and it’s not long until it handles like an overweight luxury car lumbering around a curvy race course.

That fact and budget are the main reasons I’ve been slow and deliberate in changes to my SIG Sauer M400 Classic, although it looks like the Mission First Tactical Battlelink Utility Stock (BUS) is destined to become a permanent fixture. Don’t get me wrong. There’s nothing wrong with the adjustable length-of-pull stock that comes with the SIG. In fact, it’s so positive and comfortable that it’s taken me four years to even consider a swap.

The BUS has some good things going for it, but first the bad news. The stock that comes with the M400 weighs 8.46 ozs. The Mission First Tactical aftermarket unit tips the scales at 9.54 ozs., even without the rattle-deadening foam provided for the battery compartment. The company lists the unit at 8.75 ozs., although regardless of the figure you believe, there’s no denying ounces can add up to pounds.

Construction is thick and rugged to shrug off those errant bangs, which partially explains that extra ounce. It’s also 1.25" longer (8" measured along the top). That changes the firearm’s overall lengths to 33 5/8" (compressed) and 37" (extended). The original configuration figures are 32 3/8" and 35 3/4", respectively. My figures don’t quite agree with SIG’s specs, either, but there’s no debate overall length increases. The change isn’t much of a concern in my case, now that the eldest three shooting addicts for grandkids have grown tall, lanky and joined the U.S. Army. I’ll save the standard version, just in case the youngest one in second grade becomes another range rat.

The BUS is 1.75" wide, compared to the original’s 1.46". The difference seems minor, but it and the gentler taper provide a much more comfortable cheek weld. At the bottom of the buttpad, which is a slightly soft but not tacky substance, it’s squared, with 1.15" of flat surface, which keeps things from rolling as much at the bench. A slight angle from the toe to the top of the buttpad is designed to speed presentation.

    

At the bottom, you’ll also find a roll pin, which serves as the hinge when opening the waterproof compartment that stores up to six CR123 batteries. That’s a lot of room, and the foam inserts are a welcome touch to minimize rattling. To open, a pair of smartly recessed buttons at the top of the buttpad are squeezed simultaneously while rotating out and down.

    

This thing isn’t coming open accidentally, take my word of it. In fact, even when you adjust length of pull the stock snaps in position with confidence-building authority.  

The unit comes with a pair of quick-detach sling mounting points (both sides) and one standard version. It works with mil-spec, six-position buffer tubes and is available in a commercial-spec version.

There’s no denying the AR-15 is one of the most versatile and customizable firearms available today. It can be a blessing, or curse, depending on the changes you make. I have future plans for that spacious storage area…..hopefully it won’t take me another four years to get around to them.

 

Latest

Taurus Expedition Rifleman Review 1
Taurus Expedition Rifleman Review 1

Rifleman Review: Taurus Expedition

Taurus entered the bolt-action rifle market with its Expedition, a Remington 700-pattern design that's built to be versatile and affordable.

New For 2025: Charter Arms Pathfinder II

Charter Arms updated one of the oldest models in its lineup with the new Pathfinder II, which features a lightweight 7075 aluminum frame, making it more well-balanced and easier to carry.

Review: Kimber 2K11

The 2011-style pistol was designed to address the capacity limitations of the single-stack M1911 platform, and Kimber's approach to the concept is its 2K11, a competition-ready offering with several notable features.

Favorite Firearms: A High-Flying Hi-Standard “A-D”

Manufactured in New Haven, Conn., in late 1940, this Hi-Standard pistol was shipped as a Model “A,” but a heavier Model “D” barrel was installed later to replace the original, light barrel, leading one American Rifleman reader to call it a Model “A-D.”

Ruger Helps Families In Need Through The Kids & Clays Foundation

In the effort to help tens of thousands of critically ill children and their families across the nation through local Ronald McDonald Houses, Ruger is among some of the industry’s foremost Platinum-level sponsors of The Kids & Clays Foundation.

Unlocking The Future: Smith & Wesson's "No Lock" Revolvers

The future is shaping up to be a good one for fans of Smith & Wesson revolvers. The iconic American company had released 14 new models thus far in 2025 at the time this was written mid-year. And, with one exception, they have all shared a common feature—no internal lock.

Interests



Get the best of American Rifleman delivered to your inbox.