Rifles > Lever-Action

Winchester's 'New' Model 1873

The lever-action Winchester Model 1873, the company’s first center-fire, is a classic piece of Americana, and its iconic lines are instantly recognizable. Now it is back in the Winchester catalog, and the barrels are roll-marked “Winchester” for the first time since 1919.

The well-established reputation of the Winchester Rifle has induced certain parties to offer for sale other makes of guns as ‘Improved Winchester.’ We desire to caution buyers that all guns made by us are stamped on the barrel or on the lower tang … ‘Manufactured by the Winchester Repeating Arms Co.’ … All Guns bearing these stamps are guaranteed by us, if used with Ammunition of our manufacture.” So read, in part, the “Caution to Purchasers” on page 2 of the March 1891 Winchester Repeating Arms Co. catalog, right under a sectional drawing of the Model 1873’s action.

The Winchester Model of 1873 has been called “The Gun that Won the West” for generations—and with good reason. Nearly a quarter-million of the iconic lever-actions were produced between 1873 and 1919. Today, for the first time since the signing of the Versailles Treaty, the Winchester 1873 is back on the market with the venerable Winchester name “stamped” (really roll-marked) on the barrel.

A Brief History Of The Model 1873
Recently at Brian Lebel’s Old West Auction the only known photograph of “Billy the Kid” extant sold to William Koch, of Palm Beach, Fla., for $2.3 million, making it the most expensive historic photograph ever sold. Taken on the front porch of a building in Fort Sumner, New Mexico Territory during the fall of 1880, the image shows a confident William Henry McCarty, Jr., holding a Winchester Model 1873. Books on the Old West are full of photographs of cowboys and the like posing with their favorite rifles, more often than not, Model 1873s. It has been often referred to as the “Gun that Won the West,” while some historians might dispute the title, more than 720,000 Model 1873s were produced, and its presence and role in opening the American West is most assuredly not in question.

Oliver F. Winchester was born in Boston, Mass., and was a prosperous clothing manufacturer in New Haven, Conn., when he invested heavily in the Volcanic Repeating Arms Co. founded by Horace Smith and Daniel Wesson in 1855. By 1857, the Volcanic had failed to find its niche in the American firearm market, due largely in part to the unique self-contained Volcanic cartridge and the problems inherent with a cartridge that had exposed powder in the base of the projectile. Winchester bought out Smith’s and Wesson’s interests in the company and reorganized it as the New Haven Repeating Arms Co. Along with the company he acquired the skills and knowledge of the chief foreman, Benjamin Tyler Henry.

By 1860 Henry was able to work out some of the bugs in the Volcanic design, and using the newly introduced .44 rimfire self-contained copper cartridge, introduced the famous lever-action that bears his name, the Henry Rifle. More than 14,000 were produced during the Civil War. The year 1866 brought about a new model with a side loading gate (King’s Improvement) and a wooden fore-end, as well as a new name, Winchester. Still available only in .44 rimfire, about 170,000 were produced between 1866 and 1898. The Model 1866 also had an added feature, a two pronged firing pin that struck the rimfire cartridge in two spots, ensuring positive ignition.

With the popularity, increased performance and reliability of center-fire cartridges, Winchester introduced the Model 1873 in .44-40 Win. (also known as .44 Winchester Center Fire or .44 WCF) to a very receptive marketplace. Also chambered in .32-20 Win. and .38-40 Win., this model outlasted and outsold all other Winchester lever-actions until the introduction of the John Moses Browning-designed Model 1894. With the capability of having one cartridge for both rifle and revolver, the Model 1873 chambered in .44-40 Win. was a frontier favorite.

Available in a dizzying array of variations, today’s collector can easily spend the rest of his or her life—and a considerable fortune—collecting the various types and variations of the Model 1873. Rifles, carbines, muskets, deluxe and even one of 100 (eight made) and one of 1,000 (136 made) special-order deluxe engraved guns, offer the collector a wide variety to seek for their collections.

Shooting the “New” Model 1873
Available in two variations from the Winchester Repeating Arms Co.—the Model 1873 Short Rifle and Model 1873 Sporter Case Hardened—this “new” lever-action is a worthy successor to its legendary predecessor. Both models have 20-inch round barrels and are only chambered in .357 Mag., which allows the shooting of .38 Spl.—the latter is a favorite of cowboy action shooting competitors. The Short Rifle, reviewed here, has a blued frame and barrel, while the Sporter Case Hardened’s receiver is color-casehardened with a blued barrel.

The new Model 1873 as manufactured by Japan’s Miroku—the maker of numerous Browning and Winchester lever-actions and single-shots, as well as Browning’s Citori—is a faithful continuation and modern recreation of the famed model that ceased production back in 1919. The Short Rifle has a nicely figured walnut, straight-grip, oil-stained, satin finish stock and a blued steel crescent buttplate. Sights are a Marble Arms gold bead front and a semi-buckhorn rear, just like the originals. The quality of the bluing—and more importantly the polish underneath it—was excellent; there were no blemishes, and it was rich and even.

On the receiver’s right, a blued steel loading gate allows loading 10 rounds of .357 Mag. or 11 rounds of .38 Spl. into the under-barrel tubular magazine. At present, that is the only chambering. The tang is pre-drilled and tapped for an optional aperture rear sight. You will not find one of those obnoxious thumb safeties on this model; it has the original Winchester lever disconnect safety as well as a new firing pin block with a striker that prevents the firing pin from moving forward unless the trigger is pulled. The new ’73 maintains the classic lines and features of the original.

Out of the box, the sample rifle has one of the smoothest actions I have ever encountered on a lever gun. No need for you to make a special trip to the local gunsmith to fine tune this rifle, as it was smooth as silk. At the range, I found it just about perfect for the novice or seasoned cowboy action shooter who wants to shoot a gun bearing the Winchester name without fretting over damaging or devaluing a century-old antique.

Most who have shot a Winchester 1895 in .405 Win. or any rifle with a crescent buttplate and a high-power cartridge, find the shotgun buttplate (a flat or slightly curved butt) to be far less punishing than a crescent shaped buttplate. Nonetheless, with the Model 1873, then as now, it was only chambered in handgun cartridges that never came close to packing the punch of the later Model 1876s, 1886s and 1895s. For this reason the 1873’s crescent buttplate is comfortable to shoot and doesn’t leave the shooter with a painful memory of an otherwise enjoyable day at the range. Another advantage of the crescent shaped buttplate is, when rapid firing offhand, the crescent shape helps hold the rifle firmly in place on your shoulder.

Shooting the rifle was enjoyable, and its operation was flawless. Technically, it is a rifle but with a carbine length barrel, and as such it shouldered well and pointed on target effortlessly. Finding the front sight was no problem with the Marble gold bead, and the semi-buckhorn rear sight is not only historically correct but practical and effective.
Three types of ammunition were used at 50 yards to evaluate the rifle and all performed within the acceptable variance of accuracy given the use of the supplied iron sights and the author’s aging eyes. Younger eyes or a rear aperture sight may have tightened the groups, but most cowboy action shooters and plinkers will find the accuracy acceptable. Even when firing the rifle with .357 Mag. rounds, there was no unpleasant recoil impulse due to the crescent shape of the buttplate. It was actually hard to discern the difference in recoil between the .38 Spl. and the .357 Mag. as both rounds exerted negligible recoil when fired from a rifle that weighs 7 pounds, 4 ounces.

Unlike shooting an original Model 1873, the ejecting shells fall free of the shooter with each and every shot. That’s thanks to some engineering changes to the carrier block, which kicks empties away from the shooter on ejection. After running several hundred rounds through the gun for this review, not one of the spent casings fell anywhere close to my head or face—a surprise for a longtime shooter of original 1873s.

With its chambering in .357 Mag., hopefully this latest Model 1873 will once again find a niche with hunters as well as cowboy action shooters who desire a smooth functioning lever-action bearing the Winchester name.

1   2    NEXT >>

Share |



Enter your comments below, they will appear within 24 hours

Your Name

Your Email

Your Comment

23 Responses to Winchester's 'New' Model 1873

John wrote:
September 24, 2014

Actually 720,000 model 1873 winchester rifles were made not a quarter million

Shil wrote:
September 18, 2014

Nice rifle. I'd only consider it in .44-40, being a traditionalist. Let's see how dealer pricing goes in relation to the high MSRP.

Frank wrote:
June 27, 2014

Sadly, a once Great Firearms Manufacturing Company shot itself in both feet, decades ago, by allowing the Winchester Trademark to be coveted by a foreign, once enemy of America, Company.

silvertip76 wrote:
February 21, 2014

Dennis Superior to anything made in New Haven from 1964 to 2006 and arguably better than the pre 64s. Cost, like a fine whisky, it’s worth every penny. The 357/38 chambering allows for a greater range of power than the 44-40.

El Krusto wrote:
January 31, 2014

I just got my Case Hardened 73 today,it has the grade 3 wood (tiger striped) Its a piece of art, also have 3 new 92's and one is also case hardened [[]URL=http://s220.photobucket.com/user/64krusty/media/Model73010_zps75bc4173.jpg.html][[]IMG]http://i220.photobucket.com/albums/dd194/64krusty/Model73010_zps75bc4173.jpg[[]/IMG][[]/URL]

Brian Cole wrote:
January 19, 2014

I think they are selling great! (just try to find one!) I plan on buying one when I can find one!

Dennis wrote:
January 15, 2014

Three things wrong here. Made in Japan, Cost and only shoots .357/38. I don't see it as a big seller unless you're a serious collector. Not for me.

OG Miami wrote:
January 12, 2014

I agree, it is very disappointing to hear that this rifle is not being built in the USA. I think I will hold off even tho I was really excited about buying it. Winchester needs to reconsider this. I really think they are hurting their sales.

W.W. KNOX II wrote:
December 20, 2013

Interesting article, however I will stick with my original '73',, shoots fine,, accurate,, and its a 'rifle' for those long shots. I got it from an old 'Idaho Pioneer' and inquired as to why he had removed the 'tube spring'? He replied, 'when i used this rifle, i wanted plenty of bullets'!! , and this added a few, and when I 'lever' it, i just tip the barrel up a tad and they 'gravity flow'.. ,, works fine.. I must add,, 'works for me also'!! WW.

mike wrote:
December 19, 2013

I am sorry that a company like Winchester can only make these fine icons of American history in Japan, I love Winchester but I will only buy Winchesters made in the good old USofA . I would rather do without!

James wrote:
December 11, 2013

'An American Legend' that's made in Japan...that's a shame. Sorry Winchester but you can truly do better than that!

Bill wrote:
December 10, 2013

I agree with Earle I have a number of winchester levers old as well as the new 1886 and 1892 and now the case hardened 1873 all are fun to shoot and will handle any of the modern full power ammo. I too dislike the tang safeties on the 86s and 92s and have sent mine to Turnbull to have them removed and to have the receivers, butt plates and forend caps case hardened. To each his own but I like these rifles

Earle Smith wrote:
December 03, 2013

I've purchased a few of the new Winchesters: 2 1886s and an 1892 and they shoot and function better than the originals. With the exception of the tang safety, I would say that these are truly terrific rifles and are better built than the originals. The actions are as smooth as glass, right out of the box and they are dead on accurate.

kris wrote:
November 14, 2013

I bought one of the last 'Made in USA' Model 94s. It is a .357 magnum Trails End, Color Case frame and hexagonal barrell. The finish on the lever is very rough and the rifle is very sensitive to ammunition. mis-feeding is common. On the other hand I also have a Model 1895 take down in .30-'06. Made in Japan. The color case finish is superb and the action is smoother than any other rifle I have owned. I would not hesitate to purchase the new Model 1873s.

Fontan Louis wrote:
November 10, 2013

I aggry with your comment,the same problems for french iconic products,the 1873 is a american legend,exclusively made in America,sorry for my poor english

November 06, 2013


Kirk Holmes wrote:
November 06, 2013

I agree with Chip! If the Model 1873 (and all other levers i.e. 94, etc) were made in the U.S.A., I would glady pay a premium .... my great-grandfathers from the 1800's, and grandfathers through the 1900's (all Winchester toting men) are sure to be rolling over in their graves. ** RIP Winchester New Haven Conn.**

Barry wrote:
November 06, 2013

It is a shame that Winchester can't get an American Co to make an AMERICAN ICON, definately wouldn't spend the money to send it to Japan. Get it together Winchester, keep jobs in America, maybe less profits but employ Americans!

Chip wrote:
November 04, 2013

I am truly saddened to see yet another American icon made outside the U.S. I would happily spend $1500 IF this American company were making thier product HERE!

Joe J Huro, Jr. wrote:
November 04, 2013

I would righter have a Marlin 1894 Lever Action in the .357 Mag. @ less than half that price.

Alan wrote:
November 02, 2013

I was very excited to see the return of such an AMERICAN icon. I have a safe full of Winchesters, some have been handed down for generations. All are made in the U.S.A. You cant imagine my disappointment when I saw that yet another 'Iconic American Rifle' is actually a Japanese imposter! SHAME ON YOU, AGAIN, WINCHESTER!!!!

Abe wrote:
October 30, 2013

For 1580 dollars, I can get a Rossi .45 lever, a Rossi 357 lever, and a Rossi 30-30 lever. And they all work. But the Winchester is nice.

Bill wrote:
October 29, 2013

When will the sporter be available and where can I order one