Browning Double Mode

The BDM was a high-capacity, 9 mm pistol made in the USA and sold by Browning Arms in the 1991 to 1998 period. Browning gave it this name, which stands for “Browning Double Mode.”

The BDM system was like no other and has never been imitated or duplicated. For reasons that escape me, the BDM did not sell and was discontinued in 1999, some eight years after a splashy introduction. The main appeal of the design was a means of alternately configuring it for either DA/SA trigger action or the increasingly popular DAO style. This was performed by simply turning a switch on the slide to “R” for a revolver-like double-action trigger pull for every shot. Using the screwdriver-like tool on the magazine baseplate, the shooter turns to “P” for typical DA/SA trigger action—first shot DA, subsequent shot SA. The lever (not the mode switch) on the frame acts as a decocker and a manual safety in the “P” mode. In the “R” mode, it is a plain safety. Peter Sodoma, the Czech designer worked hard to make this pistol fit every possible police, military and concealed-carry need.

I had a couple of the guns for review back in the 90s and fired them a good bit more than I usually did with a new model. There were no malfunctions in probably 1,000 rounds and I felt the gun’s performance was excellent. Since then I have read other reviews that also gave the BDM high marks. But I have also read a couple of highly critical ones. This seems odd, but that is the report. The system may have been a little “busy,” and I think it may have confused some shooters. There were some subtle features that were particularly attractive, like the way the “R” mode worked. The hammer was down for all shots and the shooter had to work a pretty decent DA trigger to cock to fire each shot. If, for any reason, he or she wanted to fire with a short, light, crisp single-action pull, he just cocked the hammer. Also, the pistol had superior ergonomics, which made it a natural for shooters with small hands. BDMs were not widely used in law enforcement, but I know of one Sheriff’s Department that approved their use. Some of their more active officers used them in actual shootouts. It is sad that such a good design never achieved the recognition it deserved.

Share |

Comments

ADD YOUR COMMENT

Enter your comments below, they will appear within 24 hours


Your Name


Your Email


Your Comment

2 Responses to Browning Double Mode

VictorLouis wrote:
October 29, 2013

How can one miss the obvious? The thumb-safety that arguably millions have familiarity with onthe 1911 and BHP is set-up the WRONG WAY~! Down to decock/Safe and UP to fire is not ergo-friendly with a frame-mounted unit. Perfectly fine on Walther/Smith/Berettas. However, the fine unit on the Makarov makes use of the time-honored JMB method, even with its slide-mounted safety. LOVE your Ruger and Colt Collaborations!

Pete wrote:
October 17, 2013

My experience from years as a police supervisor is that complicated is undesirable. Too many choices causes confusion, and with this Browning DBA setup the average officer would forget which mode he had decided to set his pistol in for that day. This is why the revolver used to be king in police holsters and now the Glock is. In several police-involved shootings I worked, the officer's Sig was still cocked in his holster because after the traumatic incident he forgot to de-cock. For equipping a group, complicated = accidents + field failures.