Handguns > Semi-Auto

CZ P-01

The P-01 should be on the short list of anyone looking for a DA carry gun.


For Americans, Ceska Zbrojovka Uhersky Brod's CZ 75 had been the most desired handgun produced behind the Iron Curtain. It had earned the praise of none other than M1911 devotee Jeff Cooper, who declared it the best double-action pistol design in the world, owing, perhaps, to the fact that it could be carried "cocked & locked." Numerous copies of the CZ 75 were manufactured in Western Europe and marketed in the United States before the genuine article became available here—through CZ-USA. CZ has since expanded the line to include models with ambidextrous controls, shortened slides and frames, decockers and double-action-only (DAO) triggers.

The CZ 75 P-01, differs markedly in a number of ways from the original, yet should be equally appealing to American shooters. The CZ 75 P-01 is a short recoil-operated, aluminum alloy-framed, double-action (DA) pistol equipped with a decocker. It was created at the behest of the Czech national police, which presented CZ with a daunting protocol for the pistol's performance.

The test included such requirements as firing without failure following 4,000 dry firings and 3,000 decockings. Moreover, it had to endure 1,350 field strippings and 150 detail strippings. Further, to demonstrate the interchangeability of parts, any number of P-01 pistols could be randomly selected, disassembled, their parts mixed and the guns reassembled with no failures permitted.

Safety was evinced by the guns being dropped from a variety of angles onto concrete from a height of 1.5 meters (54 times) and 3 meters (five times) with no failures (a failure being a discharge). The guns were then required to fire without being serviced.
The necessary durability was proven by having the pistols fire after being frozen for 24 hours at 32 degrees F, and again after being heated for 24 hours at 126 degrees F. The guns also had to tolerate immersion in mud, sand and combinations thereof even after being stripped of oil. Finally, the pistols had to have a service life of 15,000 rounds.

Obviously, a pistol of reasonable size and competitive price that could meet such standards would be highly attractive to the U.S. market. The people at CZ-USA thought so, too. A company official declared the P-01 "the most reliable and accurate pistol the company has ever made."

A first glance, the P-01 simply resembles a chopped (shortened barrel/slide and frame) CZ 75, but there are subtle and significant differences. The new gun has both rear and forward serrations on the slide for better purchase. The trigger guard is recurved and horizontally grooved for those who place their off-hand forefingers there. The sights are of a low-profile, snag-free contour similar to the popular Novak design. The hammer rowel is round, like that of a Colt Commander, which reduces hammer bite on the web of the shooting hand. Further, the magazine release button has been enlarged for faster, surer engagement. Additionally, there is an M-3-type accessory rail built into the frame ahead of the trigger guard of production pistols. The grip panels, previously made of hard plastic, are now made of soft, checkered rubber. The compact gun also has a lanyard loop, a retention device useful for uniformed personnel, but of little value to civilians. The last, but likely most important, obvious difference between the P-01 and the original CZ 75 is the absence of the safety lever and the presence of the decocker.

As with traditional DA pistols, the P-01 has a long, relatively heavy first trigger pull that both cocks the hammer and releases it. All subsequent shots are single action (SA) with the energy from the fired round cycling the action and cocking the hammer. The transition from the DA to the SA trigger pull is problematic for some, but can be overcome with practice. The trigger on the new CZ is on par with other triggers of this type on other brands of guns. The decocker is a nice feature that allows the shooter to safely lower the hammer of a cocked pistol without having to touch the hammer or trigger. It is a simple system that appeals to consumers who seek an added margin of safety as well as to law enforcement agencies looking to avoid both complicated training and liability risks. A loaded-chamber indicator is another positive safety feature of the P-01.

CZ 75s, with their deeply sculpted backstraps and slim grip panels, have always fit well into the hands of most shooters and the P-01 is no exception. This is particularly impressive given the fact that CZ 75s have a double-stack magazine design. There is nothing about the feel of this small gun's grip frame to indicate it is a compact model. The only complaint as to ergonomics was that the extreme forward position of the trigger in the double-action mode made reach difficult for those with medium to small hands. Otherwise, the controls—including the frame-mounted safety—are quite good; well-located and easy to manipulate.

The aluminum alloy frame is a big plus for the P-01. It makes little sense to make a gun that is compact, but heavy. The frame is mated to a steel slide and both are coated with a thick layer of a durable polymer finish.

We were quite impressed with the CZ 75 P-01. Despite being designed specifically for law enforcement, it has practically all the features anyone would want in a DA carry gun: reliability, accuracy, a decent chambering, firepower, light weight, compactness, durability and good ergonomics. It should be on the short list of anyone looking for a DA carry gun.

Manufacturer: Ceska Zbrojovka,
Importer: CZ-USA; (800) 955-4486; www.cz-usa.com
Caliber: 9 mm Luger
Action Type: locked breech, short-recoil semi-automatic pistol
Frame: anodized aluminum alloy receiver, carbon steel slide; both polymer coated
Barrel: 8.86"
Magazine: detachable 14 round capacity
Rifling: 1:16" RH twist
Sights: pinned front post; square notch, low profile dovetailed rear; three dots
Trigger: traditional double-action, ?-lbs. pull
Overall Length: 7.2"
Width: 1.38"
Height: 5.03"
Weight: 1.7 lbs. (empty)
Accessories: hard plastic case, gun lock, cleaning kit
Suggested Retail Price: $608

CZ P-01

Share |



Enter your comments below, they will appear within 24 hours

Your Name

Your Email

Your Comment

7 Responses to CZ P-01

Mredding wrote:
December 10, 2014

I purchased 75/P01 instead of the FNS, I picked it up & feel in love with it. Felt as part of my arm. Needle Driver at 10-20 yards, easily carries 1-2' groups. Still got the FNS, but love my CZ.....

Dan wrote:
February 03, 2014

Infinitely more reliable than any Beretta that I have owned. Fabulously reliable and accurate.

Steve D wrote:
August 10, 2013

I own a cz 75bd and a cz 75 sp 01 tactical. I love shooting both of them so I just bought a p 01 It is as accurate as the bigger guns with only slightly more felt recoil. I got rid of my shield 9mm for this. These are fantastic guns for range or carry. If you get a chance to shoot one don't turn it down . I bought mine from glory outfitter for 540 delivered and its worth every dollar.

Jim Bob wrote:
February 01, 2013

Had one for several years, was out shooting one day in an old quarry and it started raining we didn't want to stop. Shot for over 3 hours in the pouring rain, gun soaked ammo soaked mags soaked. It never failed, we were shooting a metal silhouette at 100 yards we could here it hit hit easily 9 out of 10 shots at 100 yards in the rain. I have Sigs Kimbers Colts and a few others this is my favorite carry gun by far.

Ed wrote:
January 01, 2013

Corrections: 1) 32 Degrees is officially freezing. Not 36 Degrees. 2) I think you mean to say DECOCKER as opposed to SAFETY in the 3rd to last paragraph.

Ed wrote:
December 31, 2012

Just gripping this pistol made me want one. I bought the P-01 and found it to be one of my most accurate pistols (including a few Berettas). My H&K USP and my Ruger Mk III are it's only competitors for accuracy in "my arsenal". I like this gun so much that I bought the .40 S&W P-06. Other than a slightly protruding mag base, I like it as much. For less than $600 for both my P-01 and P-06...I feel I got a bargain...especially with the night sights on the P-06. The only problems I see are getting used to NO safety other than a long-pull DA. Plus, extra mags are pretty hard to find although everyone is currently panicking over a possible hi-cap mag ban. My recommendation for now: GO BUY ONE! They're a shooting work of art.

ULITHI wrote:
December 07, 2012

Comments...I bought one of these about 5 years ago. The only complaint is the rattling of the 9mm ammo in the magazine. It is a small matter when one considers they very good (at least to me) accuracy with generic ball. The P-06 is in .40 with only a 10 round capacity. I'd have bought that one too but 10 rds seems to be a extreme reduction in compacity.