by NRA Staff -
Sunday, July 15, 2012
Andrew Burgess’s lever-action rifle produced by Colt may have had too short a lifespan, but an Italian-made replica gives this grand rifle a new lease on life.
The color-casehardened metalwork on Uberti’s Burgess rifle replica is flawless.
Like the Winchester ’73, the Burgess utilizes a top-mounted extractor. However, ejection is initiated by the spring-loaded collar surrounding the firing pin.
Unlike the Winchester which employs a pivoting loading gate, the Burgess’ loading gate slides fore and aft.
The author found that the sliding loading gate was actually easier to use than a pivoting type. Here at one of the cowboy action matches he loads up for another round.
The Burgess features a massive breech bolt within the receiver. Lockup is still with a toggle, but the throw is much shorter and thus stronger.
A buckhorn rear sight is adjustable for elevation via a notched elevator. Windage can be adjusted by drifting the sight within the dovetail.
Though not quite as slick out of the box as his Uberti 1873 replica rifle, the Burgess performed flawlessly for the author in a couple of cowboy action matches.
With its short receiver and overall length, the Burgess is a quick-handling rifle well-suited for cowboy action shooting, plinking or small-game hunting.
Overall the author had very few complaints with the Burgess rifle replica. He thought well enough of it to place an order for one in its original caliber, .44-40 W.C.F.
E-mail your comments/questions about this site to:EmediaRifleman@nrahq.org For questions/comments about American Rifleman magazine, please e-mail:Publications@nrahq.org You can contact the NRA via phone at: NRA Member Programs1-800-672-3888
To advertise on American Rifleman, visit nramediakit.com for more information
Get the American Rifleman Insider newsletter for at-a-glance access to industry news, gear, gun reviews, videos and more—delivered directly to your Inbox.