The Ruger I’ve Been Waiting For

by
posted on August 8, 2011
keefe2015_fs.jpg

We here at the magazine are 100 percent behind Ruger CEO Mike Fifer’s “Million Gun Challenge” to benefit NRA. Ruger has pledged to donate $1 million to NRA if 1 million new Ruger firearms are sold between the 2011 and 2012 NRA Annual Meetings and Exhibits. Fifer recently came to NRA HQ to meet with Wayne LaPierre and Chris Cox to drop off the first $300,000 installment.

My boss, John Zent, asked me to write about which Ruger I plan to buy (one must do one’s part, after all), and to be frank, I have quite a few Rugers already. I was leaning toward a No. 1 in 7x57 mm Mauser, but now that rifle will simply have to wait.

My friend and American Rifleman Field Editor Wiley Clapp has some very firm and well-founded ideas on what handguns need and what they don’t. I’ve spent countless hours discussing pistols and revolvers with him, and learn something nearly every time I see his number on the caller ID.

Before he even began working quietly with Colt, Smith & Wesson and Ruger on a line of “WC” handguns, Wiley asked if it would be OK with me and the magazine if he designed a line of handguns from different makers made “his way.” Because he is a gentleman and a professional, Wiley wanted to make sure there would not be any problems for the magazine. Of course, there was no issue, and I was delighted for him. All gunwriters have opinions—it is the raison d’être of the vocation—but some are actually worth implementing in a factory firearm. That is certainly the case when it comes to Wiley Clapp.

Wiley told me about his friendship with Bob Coyle from TALO Distributors and then went over some of the guns he wanted to customize with his ideas from the factory. The WC Colt Combat Commander appeared first, and now thanks to Coyle and Ruger’s Chris Killoy, there’s a “WC” Ruger—the gun I wanted all along.

The WCGP is a matte Hawkeye stainless, six-shot .357 Mag. GP100 with a 3-inch fully shrouded barrel. Wiley is a big fan of the sights made by his friend Wayne Novak, and this wheelgun has a “Genuine” Novak low-profile rear sight seamlessly dovetailed into the top strap as well as a Novak green fiber-optic front dovetailed into thebarrel’s top rib. Only one dot, not three, as there is less likely to be confusion in a high-stress environment as to which of those dots is really your front sight. This is the only GP100 with dovetailed sights, and the only 3-inch with the Hawkeye finish.

The stocks are rubber with a thumbrest in the top left, but there are panels of checkered “Dymondwood” inset into the rubber. Like those on his Commander, the panels taper and are wider at the back, and have “fingerprint checkering” only at the front where the fingers interface with panels.

The production run is limited to 2,000 guns, so I have already placed my order. A practical trail gun for the backcountry that could be carried concealed in a pinch, this is the WC gun I wanted all along. Get your own, but get in line behind me.

Latest

Lonewolf Slide Horman
Lonewolf Slide Horman

Review: Lone Wolf's Alphawolf Caliber-Conversion Slides 

For owners of .40 S&W-chambered Glocks, Lone Wolf's Alphawolf caliber-conversion slides are an easy way to update the design.

Vista Outdoor Advises MNC Capital To Increase Offer Price

Vista Outdoor announced discussions with MNC Capital (MNC), the company that made a $2.9 billion unsolicited offer earlier this year.

Rifleman Review: Taurus G3 Tactical

In recent years, Taurus has fully fleshed out its polymer-frame, striker-fired pistols, culminating in the third-generation G3 series available in several configurations. One of the more-recent introductions in the line is the G3 Tactical, which incorporates a number of desirable features.

Winchester Engages Members Of Congress

Winchester Ammunition recently hosted legislators and outdoor industry representatives at a special event in Washington, D.C.

New For 2024: PTR Industries PTR 63

PTR Industries, known for its roller-delayed platforms, has a new 5.56 NATO-chambered model out for 2024 that takes STANAG magazines. Here are the details on the company's new PTR 63.

Montana Rifle Co. Re-Opens Under New Ownership

Grace Engineering Corp., based in Memphis, Mich., announced it has acquired the assets and rights of Montana Rifle Co., which closed its doors in 2020 after more than 20 years in business.

Interests



Get the best of American Rifleman delivered to your inbox.