The Ruger I’ve Been Waiting For

We here at the magazine are 100 percent behind Ruger CEO Mike Fifer’s  “Million Gun Challenge” to benefit NRA. Ruger has pledged to donate $1 million to NRA if 1 million new Ruger firearms are sold between the 2011 and 2012 NRA Annual Meetings and Exhibits. Fifer recently came to NRA HQ to meet with Wayne LaPierre and Chris Cox to drop off the first $300,000 installment.

My boss, John Zent, asked me to write about which Ruger I plan to buy (one must do one’s part, after all), and to be frank, I have quite a few Rugers already. I was leaning toward a No. 1 in 7x57 mm Mauser, but now that rifle will simply have to wait.

My friend and American Rifleman Field Editor Wiley Clapp has some very firm and well-founded ideas on what handguns need and what they don’t. I’ve spent countless hours discussing pistols and revolvers with him, and learn something nearly every time I see his number on the caller ID.

Before he even began working quietly with Colt, Smith & Wesson and Ruger on a line of “WC” handguns, Wiley asked if it would be OK with me and the magazine if he designed a line of handguns from different makers made “his way.” Because he is a gentleman and a professional, Wiley wanted to make sure there would not be any problems for the magazine. Of course, there was no issue, and I was delighted for him. All gunwriters have opinions—it is the raison d’être of the vocation—but some are actually worth implementing in a factory firearm. That is certainly the case when it comes to Wiley Clapp.

Wiley told me about his friendship with Bob Coyle from TALO Distributors and then went over some of the guns he wanted to customize with his ideas from the factory. The WC Colt Combat Commander appeared first, and now thanks to Coyle and Ruger’s Chris Killoy, there’s a “WC” Ruger—the gun I wanted all along.

The WCGP is a matte Hawkeye stainless, six-shot .357 Mag. GP100 with a 3-inch fully shrouded barrel. Wiley is a big fan of the sights made by his friend Wayne Novak, and this wheelgun has a “Genuine” Novak low-profile rear sight seamlessly dovetailed into the top strap as well as a Novak green fiber-optic front dovetailed into the barrel’s top rib. Only one dot, not three, as there is less likely to be confusion in a high-stress environment as to which of those dots is really your front sight. This is the only GP100 with dovetailed sights, and the only 3-inch with the Hawkeye finish.

The stocks are rubber with a thumbrest in the top left, but there are panels of checkered “Dymondwood” inset into the rubber. Like those on his Commander, the panels taper and are wider at the back, and have “fingerprint checkering” only at the front where the fingers interface with panels.

The production run is limited to 2,000 guns, so I have already placed my order. A practical trail gun for the backcountry that could be carried concealed in a pinch, this is the WC gun I wanted all along. Get your own, but get in line behind me.


Share |

Comments

ADD YOUR COMMENT

Enter your comments below, they will appear within 24 hours


Your Name


Your Email


Your Comment

40 Responses to The Ruger I’ve Been Waiting For

Carol wrote:
January 26, 2012

Nice grips! Having said that, I would much prefere a laser without having to pay for the ones shown. Does the ejector actually push the brass all the way out of the cyclinders? Where can you see one?

Duane Crawford wrote:
August 21, 2011

I would love to buy one of these GP100's in Wiley's column in the last Rifleman -- where and who do I see about getting or ordering one of these???

Steve V. wrote:
August 17, 2011

I have my name on the list to get the new SR1911. I am 1 of 300 and the gun shop says Ruger can only get them 15 guns this year. What's up with that???

Greg wrote:
August 16, 2011

Looks like a good gun with solid, dead-on dependibility. Only defect is the Novak sights. Had a bad experience with their gunsmithing once. Never want anything from them again. Other than that, I'd buy the Ruger.

John B wrote:
August 15, 2011

Nice, now make one for lefties.

willytrav wrote:
August 15, 2011

How about recommending which ruger for a woman?

joe mclaughlin wrote:
August 15, 2011

She is a work of art

Don wrote:
August 14, 2011

LOL! Love Wiley, but he's always loved bulldogs and bruisers like this, too. That's fine for a big Marine/cop with big hammy hands. How about explaining something more about it than just the sights? I like the 4" barrel on my 686 and the trigger, too, for a trail/duty gun, and both kinds of sights on mine work fine, thanks; I say both, because it also has Crimson Trace grips; it's about perfect. For a stand-off at anything over 30 feet, I'll even put my beloved 1911A1 down in favor of it, because it's point-of-aim MOA out to 50 feet. With this, I lose muzzle velocity and accuracy, but still not small enough for carry? Seems to be a trade-off for the worst of both worlds to me. NICE GUN, I'm sure, but explain to me AGAIN why I want a short-but-not-short-enough 3" .357/.38 with a Ruger trigger?

Jennifer in Alabama wrote:
August 14, 2011

I've been carrying my Ruger security six since I turned 21 and I plan to die with it. Never has she failed me while shooting. I don't shoot her much so she's in mint condition. I had to change grips, yes I still own the originals, but the packmars (sp) were better fitting. I have looked into buying the semi autos, but my girl goes everywhere with me. I'm satisfied! Jen :-)

KMS wrote:
August 14, 2011

I have the old security six stainless .357mag and that is my favorite gun in my collection. Flawless workmanship. A piece of art. I have my on several new Rugers.

SA Minniear wrote:
August 14, 2011

I'd prefer the gun in .40 cal or larger, even if it meant reducing it to 5 shots. There is a very good reason why Law Enforcement carry 40 S&W.

Patrick wrote:
August 14, 2011

Carried a Ruger .357 and found it to be very accurate, and fast to reload. Much easier than the S&W. Would love to try this gun.

Lanney wrote:
August 14, 2011

A limited run means premium prices. I already have a GP100 so I will pass. I will be glad when Ruger can ship enough 1911's to start meeting demand.

Rick Pere wrote:
August 14, 2011

Only if they make it in 44 Magnum, without any fancy writing on it, with plain black rubber grips. Don't like all the fancy flummery!

Gary wrote:
August 14, 2011

So where can you place an order?

Jeff wrote:
August 14, 2011

The SP101 5 shot 357 with Hogue monogrip is my daily driver of choice. Very excellent feel and great looking piece as well.

Dana wrote:
August 14, 2011

I have owned my GP100 for 18 years and I love it. It is my carry/duty weapon. I will not carry anything else. You get what you pay for.

Jason wrote:
August 14, 2011

I want one

Keven John wrote:
August 14, 2011

I can do the sights myself but will we be able to order that grip ala cart?

Dale wrote:
August 10, 2011

Good idea but, I would prefer a round butt. Would like to see one & hold it. A .357 is very versatile and good protection from man or beast.

Ernie wrote:
August 09, 2011

I've had a Ruger stainless steel Security-Six, .357 mag with a 6" barrel and adjustable sights since 1982. It has never failed me and shoots better today than when I first got it. Hogue grips and white outline rear sight. The best revolver I've ever owned!

Alf wrote:
August 09, 2011

I wish...! but what price in Australia!

BURN wrote:
August 09, 2011

John O African Game have been killed with a .357 it is plenty of gun with the right loads for NW America Granted not a first choice caliber but it would do in a pinch.

Don wrote:
August 09, 2011

Have a Rugar GP100 with 6" barrel. The 357 is plenty of hog power. I have taken 200 pounders at 70 yds with open sights. Love every bit of it. Ive got Beretta and Taurus's and did not find the price for the GP 100 as bing high compared to these foreign makers. What I like is the whole cylinder pops out of quick loading

Mike wrote:
August 09, 2011

Better buy it quick if you like it. Ruger stops making their good stuff abruptly for reasons unknown. They could sell a truckload of PC-9's and PC-4's.

keyguy wrote:
August 09, 2011

@ silverback. It's one thing to be a cheapskate, and another to not be able to afford (or justify) spending a lot on a firearm when you are financially strapped.Who wouldn't love a high end piece like this? I am content in knowing my "cheap" weapon is as capable as this. But not nearly as beautiful.

Bear wrote:
August 09, 2011

To those complaining about cost/American gun makers pricing themselves out of it. You like to eat don't you?Americans are building these Rugers and they don't like working for $3 a day like our friends in Slovakia. Buy the Ruger quality!

Tony wrote:
August 09, 2011

Have your dealer contact Talo Distributors to find out where he can purchase one for you.

Ed wrote:
August 09, 2011

So where do I order one? I can't find a WCGP anywhere on the Ruger web site.

silverback wrote:
August 09, 2011

Nice gun! I have a Talo Ruger Vaquero Sheriffs model that I love. Might get this one too. BTW, Ignore the price complainers, cheapskates will never understand quality. They will always buy the cheapest thing they can find and then pretend it's as good as a more expensive item.

Greg wrote:
August 09, 2011

Unfortunately there was is no mention of improving the trigger pull.

johnny b wrote:
August 09, 2011

i agree w/ the out of sight pricing...I saw in the American Rifleman that if Ruger sells 1,000,000 guns this year that they will donate $1,000,000 to the NRA...wow...$1 per gun !!! very generous !!! lol

Jason S Carter wrote:
August 09, 2011

if only this was chambered in 44 special it would be perfect.

ntrudr_800 wrote:
August 09, 2011

Oooh looks nice :)

Kevin Kennedy wrote:
August 08, 2011

I sure wish Ruger would make a .44Mag Alaskan with a four inch barrel. Please Please Please! Pretty Please! That would be my favorite trail/hog hunting carry

ian forgey wrote:
August 08, 2011

I would love to help you sell a million i think i will go buy one

John O wrote:
August 08, 2011

Back country gun? Need a bigger caliber if you are in the NW United States...

Eddie Roark wrote:
August 08, 2011

I like the looks and the snag free back sight.The only problem will be price.American gun makers insist on pricing themselves out of business

M.L.Mallory wrote:
August 08, 2011

How about this revolver with a 4 inch barrel and a front tritium night sight! The second 2000 WC Ruger GP 100 run!!!

DD wrote:
August 08, 2011

Sweet.