For the Nikon M-223 Riflescope article, I feel compelled to point out that the scope mount on the Para (bottom gun in the picture) is on backwards. The intention of this type of mount is to place the scope further forward on the gun. This is important when there is only a picatinny rail on the receiver and not the forearm. This allows the shooter to have proper eye relief with the scope while also having proper cheek weld on the stock. With the scope mounted as shown, the shooter's head would have to be too high for a proper cheek weld.
The article also states that "the M-223 mount is built with a 20-m.o.a. incline to maximize elevation adjustment range for extreme long-range shooting." By having the M-223 mount reversed, the elevation adjustment range of the scope is decreased. Reversing the mount actually points the scope slightly "up" rather than slightly "down". When used properly, the incline puts the crosshairs higher in the scope - when zeroed - and gives more adjustment range for longer shots.
Otherwise, good article. Thanks.
Comments
ADD YOUR COMMENT
Enter your comments below, they will appear within 24 hours
3 Responses to Nikon's M-223 Riflescope (Page 2)