The Smith & Wesson M&P Shield

By Joseph L. Kurtenbach, AR Assistant Editor


Unveiled at the NRA Annual Meetings & Exhibits in St. Louis, Mo., Smith & Wesson’s newest product, the M&P Shield, is sure to turn heads. The topic of internet buzz and industry speculation, Smith & Wesson’s cryptic “Shield Yourself” ad had people wondering just what the folks at the Springfield, Mass., plant were up to. In preparation for the launch, a troop of writers, myself included, were invited up to draw back the curtain and pull the trigger on this exciting new pistol.

Designed for concealed carry, the M&P Shield enters the vaunted handgun line as the smallest and lightest offering to date. Only 6.1-inches long, 4.6-inches tall and 19 ounces in weight (unloaded) the Shield is super compact, but more striking than these dimensions is its sub-1-inch width. This gun is slim. The frame is 0.95 inches at its thickest, and the pistol’s fattest components, the grips, measure in at a scant 0.98 inches. With such a slight profile it would seem reasonable that some features had to be left on the proverbial cutting room floor. Not so with the Shield. With a magazine release button, take-down lever, slide-stop and thumb safety switch, nothing is missing from the frame’s left-side control panel.

The Shield is available chambered either for 9 mm Luger or .40 S&W, meaning this compact package brings full-size power. The pistols will ship with two, single-stack magazines; one flush-fitting and capable of holding seven rounds of 9 mm or six rounds of .40 S&W, the second with plus-one additional capacity and stock extension for a full three-finger grip. The Shield follows M&P protocol in construction, the molded polymer frame utilizes texturing standard in S&W’s patented Palmswell Grips, and the steel slide and 3.1-inch barrel are finished with the very durable black melonite coating. It is important to note, however, that the Shield’s grips are not interchangeable like other M&P models, rather they are fixed and of medium size, according to Palmswell dimensions. The sights are of the three-dot configuration, and as with other guns in the M&P line, the rear sight is windage adjustable.

Mechanically, the Shield will be familiar to those with M&P experience, and it’s similar to many popular striker-fired handguns. A stainless-steel chassis houses the trigger assembly, which includes a sear release lever that can be accessed through the slide’s ejection port when locked to the rear. The sear release can be manipulated with a pen or similar tool, and it makes disassembly possible without having to pull the trigger—an increasingly prevalent requirement for law enforcement service arms. The trigger itself has been upgraded and is probably representative of what will be used in all future M&P production. While the previous design was praised for having a very smooth, single-action pull, the trigger’s reset was often very hard to detect requiring a near full-length pull for each follow up shot. In the Shield, the trigger remains smooth and crisp, but has been re-engineered to provide a very clear reset with audible and tactile cues.

While at Smith & Wesson, I was able to get some time—a lot of time actually—behind the trigger and I have to say I enjoyed every minute of it. I sent approximately 300 rounds downrange without a single malfunction. Expand that to include the nine other writers firing a similar number of rounds and the result is 10 M&P Shields firing 3,000 shots without a single gun-induced stoppage (there were approximately five failures during the two days of shooting, all stemming from the same problem with the ammunition). Needless to say I was impressed, and looking at a range floor completely covered in brass, it is safe to assume my colleagues were as well. The Shield has an excellent natural point, a characteristic demonstrated in some one-hand drills we conducted, and it proved surprisingly accurate even out to 25 yards.

As if this new gun were not appealing enough, Smith & Wesson assured us that a host of Shield accessories would be available for sale at launch. Bucking the traditional pattern of introducing a firearm and letting the accessory market respond, S&W made shrewd use of non-disclosure agreements with holster and sight makers to ensure gear for the new pistols would be on the market from day one. The stable of companies on board for the Shield launch includes, but is not limited to, Blackhawk, Blade-Tech, Crimson Trace, De Santis, Fobus, Galco, HiViz, Laserlyte, Uncle Mike’s and XS Sights. This may be too much for the gear-dos out there, but fear not, suggested retail for the Shield is only $449, and real-world prices are expected to be lower, meaning those anxious to get their hands on the gun should have money to spare for accessories.

Accurate, reliable, concealable, accessorized and affordable, the M&P Shield has most everything law enforcement professionals and self-defense practitioners could ask for. Stay tuned for a full review and evaluation of the Shield, and further coverage of the NRA Annual Meetings & Exhibits in American Rifleman magazine, and here on AmericanRifleman.org.

 

Defensive Handgun Maintenance Tips

by Jim Wilson


There is no doubt that regular care and maintenance will improve the reliability and longevity of any firearm. This is especially true when it comes to the defensive handgun that you may have to bet your life on. Now, at the outset, I'm going to assume that you know how to clean a handgun. What I'm about to share are some little maintenance tips that I've learned through the years of carrying a handgun.

To begin, let's look at one aspect of the cleaning challenge, namely the use of lead bullets. Years ago, somebody decided that all he or she needed to do to get lead out of the barrel was to fire some jacketed rounds downrange and those jacketed bullets would scrub the lead right out of the bore. After all, following this little technique, the bore sure looked a lot cleaner. Unfortunately, such is not the case. All the jacketed bullets do is flatten the lead into the rifling creating a situation where moisture can get under the lead and allow corrosion and rust to start. Sorry folks, you've just got to work with that wire brush and patches until you get the lead out. There's really no other way.

One of the next biggest issues with defensive handguns is lubrication, whether too much or too little. Too little lubrication causes undue friction on the various moving parts of the handgun and can lead to reliability issues. Too much lubrication attracts dirt and powder particles, which can also lead to malfunctions. A light lubrication, each time the handgun is cleaned, will keep it running and functioning reliably.

In selecting the proper lubricant for your handgun, it is wise to stay away from heavy oils and to avoid the use of WD-40. WD-40 is a great product and quite useful, but it is not designed to be used on firearms. In many cases it can leave a solid residue that can lead to malfunctions. It is also a penetrating oil, which means it is just about guaranteed to kill any primers that it comes in contact with. The products to use are any of the lightweight lubricating oils that are especially designed for firearms.
 
A light application of oil should be put on the barrel locking lugs, or the area where the barrel interacts with the slide and frame. Another drop of oil should be applied near the muzzle of the barrel where it interacts with a barrel bushing, or the front of the slide. Also in need of lubrication are the pistol's slide rails. Occasionally, you will want to put a drop of oil on the sear and trigger mechanism.
 
With autoloading pistols it is also important to give consideration to replacing the recoil spring. This spring can become weakened under continued use and, in this weakened state, allow the gun to batter itself unnecessarily. Replacing the pistol's recoil spring about every 2,000 rounds is a good habit to get into.  After all, what is the cost of a recoil spring as compared to one's life?
 
A large majority of the auto pistol's malfunctions can generally be blamed on faulty magazines. They can become damaged in a number of ways and for a number of reasons. What is amazing is that so many shooters will just drop faulty magazines back in their shooting boxes and expect that, somehow, they will work okay during their next trip to the range. The proper place for a faulty magazine is the garbage can. 
 
With revolvers, it is important to lubricate the area where the cylinder yoke joins the frame. Occasionally, remove the slide plate and lubricate the trigger, sear and trigger return areas. Depending on the local climate, lubricating the internal parts of a revolver should only be done about twice a year.
 
During each cleaning session with your revolver it is important to check the ejector rod and make sure that it is screwed in tightly. These have a tendency to loosen up and, when they get loose enough, they will tie up the gun, making it virtually impossible to swing the cylinder out. If it becomes evident that an ejector rod is continually getting loose, a drop of Loctite on the threads will solve the problem.
 
During the revolver cleaning session it is also important to elevate the cylinder's extractor star and clean out any unburned powder and residue that may have become trapped there. Failing to do this may cause the cylinder to become difficult to close if enough residue builds up in this area.

If you are uncertain about how to properly lubricate that new pistol or revolver, you will find that most companies now provide those instructions in the owner's manuals. Yes, I know guys, but read the instructions anyway. No one has to know that you actually read the instructions.

At the end of an evening, I generally lay my defensive handgun on the nightstand by my bed. For years, I've made it a practice to keep an oily gun rag in the same place. It just takes a minute to wipe the handgun down, getting fingerprints and dirt off of the exterior.

Regular cleaning and lubrication, along with the replacement of weak and worn parts, will keep a defensive handgun in good shape for a lifetime. And that's not a bad idea at all, considering that you may well have to bet your life on it.

 

October 01, 2013

Jan Cooper, 72, was at home with her husband, Bob, 85, when she made a 911 call for help as a man attempted to break into their home. She told police to hurry as the assailant was on her back porch trying to gain entry through a sliding door. She told the police that she was armed with a .357 revolver and that she would shoot if need be. When she heard the door sliding open, she fired. The intruder fled, but was later found and arrested for burglary. "I don't mean to shoot anybody," said Cooper, "but whatever's necessary to literally stop them--he was not going to come into my home." (Foxnews.com, Anaheim, CA, 6/12/13)

Richard Duffy, 48, and his son were watching TV when an intruder broke down their front door. After a brief altercation the intruder was fatally shot, according to a spokesman for the Maine Department of Public Safety. Another man waited in a car, but fled after he heard the gunshots. (TheBlaze.com, Rome, ME, 10/1/13)

From The Armed Citizen Archives
March 1979: When Claudia Gray entered her El Paso apartment she was jumped by a man wearing only a stocking mask and a t-shirt. After the attacker and wrestled her to the bed, Gray warned him that she was expecting company. He got up and went to lock the front door, whereupon she grabbed a .22 cal. rifle from beneath the bed and shot him twice. After the police arrived and made the arrest, the previously convicted burglar was sentenced to seven years in the state penitentiary. (The Times, El Paso, Tex.)

 
 

Past Articles

Mix Six: The S&W Governor
by Wiley Clapp

Smith & Wesson calls it the "Mix-Six-Shooter" because you can mix and match loads to suit your needs. Read More »

The Smith & Wesson Model 632 .327 Fed. Mag. Revolver
by NRA Staff

The S&W Model 632 is a good all-around gun that offers ammunition versatility and several features that allow for easy handling by both men and women. Read More »

S&W's New Bodyguards
by Wiley Clapp

S&W addresses America's interest in compact and concealable handguns. Read More »

Smith & Wesson's M&P Goes Long
by Michael Humphries

Smith & Wesson's M&P15 series combines old-fashioned quality with cutting-edge design, and the offerings continue to expand. Read More »

The Smith & Wesson SD40
by by Paul Rackley, Associate Online Shooting Editor

S&W performs polymer magic with its SD series.
Read More »

The Smith & Wesson M&P Shield
by Joseph L. Kurtenbach, AR Assistant Editor

Unveiled at the NRA Annual Meetings & Exhibits in St. Louis, Mo., Smith & Wesson's newest product, the M&P Shield, is sure to turn heads. Read More »

Past Tips

Carrying in the Car
by Jim Wilson

Effectively carrying your firearm in a vehicle can prove to be a tricky task—here are some tips to help you prepare. Read More »

Concealed Carry: The Strong Side
by Paul Rackley, Associate Online Shooting Editor

Strong-side concealed carry keeps a gun close at hand. Read More »

Self-Defense Pistol 101
by Richard Mann

Using a handgun to defend your life requires more than just a familiarity with firearms. Read More »

Defensive Handgun Maintenance Tips
by Jim Wilson

Regular care and maintenance keeps your carry gun ready for anything. Read More »

 
 

1852

The year Smith & Wesson was founded.

80 Million

Estimated number of gun owners in the United States.

45 Million

Estimated number of handgun owners in the United States.

45%

Estimated number of American Households that have firearms.