S&W’s New Bodyguards

by Wiley Clapp


It seems as though every handgun maker on the planet has suddenly discovered America’s great interest in the compact and concealable defensive handgun. It is just plain good business to pay attention to this demand by supplying light, but powerful, high-quality and attractively priced pistols and revolvers. Shooters have stated their needs and their desires. Often those desires include a handy, easy-to-use laser sighting system. One of the biggest handgun product lines in the world comes from Smith & Wesson, and it just got a little bigger, because the firm has just introduced two new models—guns that address the needs I have just enumerated.

These are the Bodyguard-series handguns. Lest there be confusion on the matter, the company’s long-time use of the term “Bodyguard” (a shrouded-hammer, five-shot J-frame .38 Spl. made in many variations) now also includes two double-action-only designs, a .38 Spl. +P revolver and a small .380 ACP semi-automatic. It is a radical step forward for S&W, as both guns use substantial amounts of high-strength polymer in their construction. Both have laser-sighting systems to complement the traditional iron sights. And, in both cases, the laser is integral with the structure of the gun and not added by means of special grips or other bolt-ons. I was lucky enough to be invited to the plant to see the new guns assembled in the factory and fired on indoor ranges. Graciously, S&W even invited me to participate in building guns on the all-new assembly line. This is radical stuff for S&W and there’s a lot to describe before I can report what happened when I took a pair of them to the range.

S&W BG 38 .38 Spl. +P
Let’s begin with the BG 38, the model designation for the new five-shot .38 Spl. +P. Visually, there is a great deal of similarity between the J-frames and the new BG 38, particularly in overall dimensions and general profile. Using that particular shape is a concession to both tradition and holster makers, who don’t have to develop new designs. The BG 38 has a cylinder that swings out to the left. It is a double-action-only that behaves like the current line of Centennial revolvers, but that’s about where the resemblance ends. The BG 38 has no mechanical resemblance to the J-frame revolver, and no parts interchange. On the new gun, the action is completely different, arranged to be easily fabricated and easier yet to assemble. Cycling the action a few times, I was startled to see that the cylinder turned clockwise, which flies in the face of millions of existing Smiths. But frankly, what difference does it really make?

The BG 38 does not have a hand that reaches through the breech face and engages notches on the extractor to turn the cylinder. On this gun, the cylinder turns by virtue of a star-shaped rod that engages matching recesses in the extractor. On the BG 38, the frame and barrel shroud are cast in one single unit (called the upper frame) from aluminum alloy, which is threaded to accept a stainless steel barrel. In the assembly process, the barrel gets screwed in place against a fixture that establishes a proper barrel cylinder gap, and then the adjustment is locked in place by installing the front sight, which extends down and into a notch in the barrel. This prevents the barrel from becoming unscrewed. The cylinder uses a new form of extractor and differently shaped flutes, but it is made from stainless steel with PVD coating.

The frame and barrel shroud may be a single unit, but unlike conventional J-frames, the entire back portion of the revolver—essentially everything aft of the cylinder—is another unit. It is called the lower frame, and it’s made of reinforced polymer. The upper frame contains the lockwork, and the lower slides onto it and is secured to it by five screws. The trigger guard is a separate unit, and there is no sideplate. All of these seemingly radical differences from traditional J-frames simplify and speed up manufacturing.

One other difference that is going to be much more controversial is the cylinder latch. Instead of a push-forward thumb piece on the left side of the frame, the BG 38’s latch is a polymer bridge on top of the frame. It is accessible from either side of the gun, and it is nestled behind the laser unit, mounted high on the right side of the frame where the top edge of the sideplate is found on most S&W revolvers.

S&W BG 380 .380 ACP
For many years, the typical .380 ACP pistol was made of steel and worked on a plain blowback system. Shooters were willing to accept the limitations on this kind of gun, which was somewhat simpler and easier to manufacture than larger and more powerful pistols. But today’s concealed-carry handgunner demands, and usually gets, a smaller and lighter gun that is easy to carry and conceal. The .380 ACP cartridge fits in these smaller platforms very well, and S&W has been a little late in offering such a handgun.

With the introduction of the BG 380, it is evident that the delay was involved with engineering a feature into the pistol that no other gun has. The new S&W has a laser integrated into the construction of the gun, not added. The gun itself is light and compact, built around a tilting-barrel form of recoil operation.

The BG 380 is a full-featured pistol with a manual safety to back up the inherently safe double-action-only trigger system. Unlike some of the competing models, the new S&W also has a slide lock that holds the slide to the rear when the last shot is fired. On the left side of the gun, the catch that does this is manually operable. There’s also a rotating take-down lever. Also, the BG 380 uses a conventional magazine catch just to the rear of the trigger guard on the left side. These are all features commonly associated with larger pistols. Even the sights, both front and rear, are full-size, easily seen and dovetailed into the slide top for drift adjustment.

Ergonomically, the BG 380 is about as good as you can get with a sub-compact pistol. In grasping the little gun, I find the web of my hand close to the bore axis and slightly above the mid-curve of the trigger. This gives a back-and-up trigger pull. There is one ergonomic option on the new .380—it comes with two magazine floorplates. The one with a finger extension makes it a two-finger pistol and easier to shoot. The flat one produces a one-and-a-half finger butt—and it’s easier to conceal.

A New Approach To Factory Sights
Smith & Wesson partnered with Insight Technology to develop a laser system fully integrated into the design of the BG 380. It was a considerable engineering effort, and the result is nothing less than outstanding. The entire laser module is worked into the dust cover, the area on the lower edge of the receiver, just forward of the trigger guard. Somehow, they found enough room for the miniaturized circuitry that drives this device. It adds almost nothing to the bulk of the gun, and there are no awkward projecting battery chambers or the like. Naturally, the laser needs power and that comes from a couple of watch-type batteries. It is a relatively simple matter to change batteries, but make sure you keep the manual that shows and tells you how to do it. In a final neat touch to the laser system, an activation button for turning on the red dot is found on both sides of the gun. It’s conveniently located for both the trigger finger of the shooting hand and thumb of the support hand. The system is so unobtrusive that it could possibly pass without being noticed.

Laser sights were first seen on factory guns around 20 years ago, but only in fairly recent times have they slimmed down to the point where they can go onto mainstream handguns. Usually modern lasers sights are found in the form of clever grips, bolt-on units for the railed guns or units that replace recoil spring guides in semi-automatics. This partnership of S&W and Insight is a history-making event. With the BG 380, it is the first time that a laser has been integrated into the physical structure of a large-scale production firearm. Insight’s Bodyguard laser seems like a pretty good one—bright enough to be seen at 25 yards and easily managed. On the new S&Ws, the laser turns on with a push of the gray button. It’s on top of the laser unit on the right side of the revolver frame. As mentioned before, the .380’s laser is in the pistol and activates from either side. One push delivers a steady red dot downrange; a second push produces a blinking light and one more push turns the unit off. Battery life is always a problem with such devices, and this one will deliver three hours of continuous use. You can’t leave it on, either, because the unit shuts off after five minutes. Both guns have laser systems that are adjustable for point of aim to coincide with point of impact. In handling my sample guns and several others on the range, it appears that the factory adjustment is right on the money. Most shooters probably won’t need to fool with the windage and elevation screws, but they’re there if you need them.

At the range, I fired both guns in the standard American Rifleman protocol, which produced results acceptable for the guns’ intended purpose, but inconsistent with other Smith & Wesson firearms. In fairness to the test guns, the relatively large 25-yard groups might be as much a function of very small guns and long, fairly heavy trigger pulls. I also tried something new by moving the target into the FBI standard 7-yard line. At this range, I repeated the five consecutive, five-shot groups exercise, using the laser sight exclusively. As the tabulation suggests, accuracy was markedly better. As a purely firearm matter, I found the trigger pulls to be a bit awkward and unlike typical S&W firearms. This may well be because they are atypical S&Ws—they are completely new and original guns. The concept of an integral laser sighting system is radical enough, but the Bodyguard project also involves S&W’s first venture into polymer revolvers and sub-compact pistols. As has been the case with Smith & Wesson for a century and a half, the intent is to provide Americans with the means of defending themselves in times of grave need. I’m betting that these latest ’Smiths are going to be well-received.

Specs:

Manufacturer: Smith &Wesson; (800) 331-0852; www.smithandwesson.com
Caliber: .38 Spl. +P (BG 38); .380 ACP (BG 380)
Action Type: double-action-only (BG 38); recoil operacted semi-auto (BG380)
Frame: cast aluminum upper, polymer lower (BG 38); polymer (BG 380)
Barrel: 1.90” (BG 38); 2.75” (BG 380)
Rifling: 1:18.75” LH twist (BG 38); 1:16” RH twist (BG 380)
Capacity: five (BG 38); six (BG 380)
Sights: fixed, square-notch rear and ramp front (BG 38); front ramp, drift-adjustable square-notch rear (BG 380); both have integrated lasers
Trigger Pull: double-action only 12 lbs. (BG 38); double-action only 10 lbs.
Overall Length: 6.60” (BG 38); 5.25” (BG 380)
Width: 1.35” (BG 38); 3.62” (BG 380)
Height: 4.50” (BG 38); 3.62” (BG 380)
Weight: 14.3 ozs. (BG 38); 11.85 ozs. (BG 380)
Accessories: zipper case, lock, owner’s manual
Suggested Retail Price: $625 (BG 38); $575 (BG 380)


 

 

Self-Defense Pistol 101

by Richard Mann


The “keep it simple, stupid,” or KISS, principle applies to most things in life. Training with a defensive handgun is no different. To employ a handgun effectively in a defensive situation, you must be able to get it into play smoothly and deliver accurate hits before the attacker injures or kills you.

And the only realistic way to accomplish that is to practice the skills you could reasonably be expected to use in a life-or-death situation before it occurs. They include drawing the handgun, hitting the target, moving, using cover, reloading and clearing a malfunction. The following is a 100-round training regimen, consisting of five drills, that takes all these skills into account. Become proficient with them now, and you will be better-prepared for the dark day when trouble comes to call.

The Dot Drill (24 shots)
I strongly believe that most defensive handgun practice should start with the gun holstered. This lets you practice your draw stroke or handgun presentation more frequently. When practicing basic skills most shooters draw the handgun only once and burn through an entire magazine before they holster again, if at all, which wastes precious opportunities to practice handgun presentation.

Position a target with six 2-inch circles at between 5 and 7 yards. Shoot one shot at each circle, drawing the handgun from the holster before each shot. The goal is to fire one shot at each circle and hit each target once. This is not a speed drill, but rather it’s an accuracy and gun-handling drill to help you establish a foundation for gun presentation, sight alignment and trigger control. Conduct this drill four times at the beginning of every trip to the range.

The Failure Drill (24 shots)
Il Ling New, an instructor at Gunsite, is one of the best firearm instructors I know. She believes practicing head shots at between 5 and 7 yards is a great way to stay sharp. Why? According to New, “The idea is to become absolutely confident in making that shot, at least at that distance, every time, under all conditions and on demand. If I can do that, I am well-equipped to deal with bad things that may happen to me. Vital zone shots at 15 yards should be easy if one can do head shots at seven yards.”

I agree, but to maximize training opportunities I like to incorporate head shots with torso shots in what’s called a failure drill. The failure drill presents the problem that you have engaged an attacker with two shots to the torso and they have had no effect. To stop the attack, you transition to the head as a target and fire one shot.

Position a silhouette target at between 5 and 7 yards. At the signal, draw your handgun and fire two shots in quick succession to center mass. Then, immediately fire one shot to the center of the head. You’ll have to slow down to make the head shot count. Something between three and four seconds is commonplace. Perform this drill eight times during each practice session to establish your average time. Work toward a goal of completing the drill with no misses in less than three seconds.

New also stresses the importance of practicing head shots from every position you can think of; not just while standing square in front of the target. You can do the same with the failure drill.

The 45 Drill (25 shots)
Even a disciplined shooter’s reaction to a stressful situation can be chaotic. The first few times police officers and good competitive shooters are subjected to close-quarters, force-on-force training, a common reaction is to point their handgun at the threat and to pull the trigger until they run it dry. The same response has been observed in gunfights. Adrenalin surges prompt the shooter to thrust the gun forward and pull the trigger fast and repetitively.

We cannot simulate the stress levels you’ll experience in a life-and-death encounter, but we can simulate your reaction. This is why I believe the adrenalin dump drill is important. If your reaction is going to be to shove the handgun toward the target and start yanking on the trigger, then learn how to do it effectively. I call my version of the adrenalin dump drill “The 45 Drill,” because the drill has four elements of five—five shots at a 5-inch circle at 5 yards in five seconds.

This is a difficult task for many shooters, especially when drawing the handgun from concealment. If you can successfully perform this drill on demand, under time, with no misses, you should be able to pass any shooting requirement necessary to obtaining a concealed carry license. Practice it five times each training session. At first you’ll probably have several shots land outside the 5-inch circle, and your time will be slow. Slow down your shot cadence even more and strive to get all five shots in the circle. Once you can do this consistently, gradually speed up with the ultimate goal of completing the drill in less than five seconds.

The El Prez—Modified (24 shots)
The likelihood of your being attacked is slim, and the likelihood that it will be by multiple attackers is even slimmer. But the threat of multiple attackers is not the only reason we practice multiple-target drills. Learning to transition from one target to the next, especially when they are set at different ranges, teaches you to obtain a sight picture quickly and to control your shot cadence based on range to the target.

One of the most famous multiple target drills was made so by Gunsite founder Col. Jeff Cooper. It’s called the El Presidente. I’ve modified it through the years as a means to help me evaluate shooters and track skill development. My modifications come from my experience as a police firearm instructor and what I’ve learned from other shooters I respect and trust.

For instance, Sheriff Jim Wilson believes you should learn to shoot from cover. This makes perfect sense; there’s no use standing in the open while the bad guy shoots at you. “Top Shot” winner and former British Army Capt. Iain Harrison likes to incorporate movement, and this makes sense too—a moving target is harder to hit. And, if you stand in one place when you practice, you’ll likely do the same in a fight. Caleb Giddings, “Top Shot” competitor, revolver aficionado and active competition shooter, believes the ability to reload your handgun in a hurry is important. While it’s unlikely a defensive encounter will reach the point at which a reload is necessary, the steps to reloading are similar to those required to clear a malfunction.

This 12-shot drill is somewhat unrealistic, but it does provide the opportunity to evaluate a variety of handgun skills and is a good benchmark to use as an evaluation tool. Place a silhouette target at 3 yards, one at 5 yards, and one at 7 yards. Space them 5 feet apart laterally. Start by standing in front of the right or left target, and at the signal engage each target with two shots working from the closest to the farthest. Then, move laterally about 10 feet to cover, reload and repeat the drill from behind cover.

Completing this drill in less than 10 seconds with all kill zone hits demonstrates a high level of proficiency. Times between 12 and 18 seconds with no misses will be average. Run this drill twice at the end of each practice session. Use it as a standard evaluation exercise and over time you’ll see improvement in each skill the drill targets. Take your total time and add five seconds for every miss. Add the times from both runs together and divide by two to get your score.

Other Training Tips
The basis for all marksmanship training is sight alignment and trigger control. Both must be mastered before realistic self-defense training can begin. One of the best drills for learning and sustaining these skills is dry-fire. Some shooters look at dry-fire as pointless. It’s not. The best shooters in the world do it regularly. It’s a very good way to develop hand/eye coordination and kinesthetics or proprioception—the unconscious perception of movement and spatial orientation arising from stimuli within the body itself.

Any time you dry-fire, remove all the ammunition from where you are practicing, double and triple check that your handgun is unloaded and be sure that you are working—pointing your handgun—on a safe direction. Using a snap cap is a good idea, regardless of whether your handgun maker recommends one.

Basic dry-fire is nothing more than pointing the unloaded handgun at a target and squeezing the trigger while you keep the sights aligned on the target. You want to execute the trigger pull without disturbing the sights. Handgun-mounted lasers can help tremendously and there are even training lasers designed just for this purpose. If you flinch or snatch the trigger it will show up as a wiggle or jerk of the red dot on the target.

You can also dry-fire all of the drills explained here. However, unlike revolvers that let you experience a real trigger pull over and over, you will have to cycle the slide or cock the hammer of some semi-automatics when dry-firing. This is not an issue for individual shots, but it is not compatible with multi-shot drills. Don’t worry; just go through the motions of the failure drill, the 45 and the modified El Prez. You may not experience a true trigger pull for each shot, but you will still be establishing a foundation that commits to memory the presentation and manipulation of the handgun, movement, and sight alignment.

Becoming proficient with a defensive handgun is no different than becoming a good golfer or typist; proper practice is the key. Iain Harrison told me that he believes a .22 Long Rifle pistol is a great training tool, and he often takes a brick of ammunition to the range. This makes perfect sense; .22 Long Rifle ammunition is very affordable when compared to center-fire defensive handgun ammunition. The handguns also have minimal recoil and muzzle blast, both of which are detrimental to establishing the basics of marksmanship.

I believe one of the best training tools you can acquire is a .22 Long Rifle conversion kit for a semi-automatic handgun or a .22 Long Rifle revolver that is an understudy to the revolver you carry for personal protection. This lets you train at a fraction of the cost, but with a handgun that emulates the one you carry. I’ve run thousands of rounds through a Kimber .22 Long Rifle conversion kit for an M1911 and routinely used it as a practice tool and as a trainer for new shooters. As you progress through your training you need to incorporate shooting with one hand—both left and right. Start this process with the rimfire handgun or conversion kit.

How often should you practice? I’ve said before that, financially, we are all somewhere between a single box of ammo and a bodyguard. Not only are our pocketbooks a constraint, but we also have to operate within time limitations. The correct answer with regard to how much you should practice is simple: as much as possible. Some need more practice than others to develop skills and sustain them. You’ll have to find a balance based on how proficient you want to become and what your pocket book and your watch will allow.

 

November 12, 2013

A woman and her son were driving around 11:30 a.m. when a vehicle cut them off and abruptly stopped in front of them. A man exited the vehicle, pulled the woman from her car and held a knife to her throat. When the woman's son got out of the car to confront his mother's attacker, he was reportedly punched in the face. A passerby witnessed the attack and stopped to intervene with his .40-cal. handgun. When the suspect saw the firearm, he quickly returned to his vehicle and drove off. The good Samaritan who had stopped to help was able to get the suspect's license plate number, which later resulted in the attacker's arrest. He was charged with assault and battery of a high and aggravated nature and assault and third degree battery. (WISTV.com, Richland County, SC, 6/5/13)

Four intruders entered a Virginia home armed and masked, ready to rob the victims. The homeowner pulled his firearm and hit an intruder, according to police. Others grabbed a second masked man and held him. Two of the intruders escaped. The residents were unharmed. The intruder who was shot was taken to the hospital and is expected to recover with charges pending. The second suspect was charged with robbery, use of a firearm in a felony, breaking and entering, and conspiracy to commit a felony. Police continue to search for the two who escaped. (PilotOnline.com, Portsmouth, VA, 10/3/13)

From The Armed Citizen Archives
September 1976: A robber broke through the front door of Frank Davenport's Atlanta, Ga., home and threatened to beat him until Davenport gave him money. But Davenport reached under the bed for a .38-cal. pistol and fired twice, killing his assailant. (The Atlanta Journal, Atlanta, Ga.)

 
 

Past Articles

Mix Six: The S&W Governor
by Wiley Clapp

Smith & Wesson calls it the "Mix-Six-Shooter" because you can mix and match loads to suit your needs. Read More »

The Smith & Wesson Model 632 .327 Fed. Mag. Revolver
by NRA Staff

The S&W Model 632 is a good all-around gun that offers ammunition versatility and several features that allow for easy handling by both men and women. Read More »

Smith & Wesson's M&P Goes Long
by Michael Humphries

Smith & Wesson's M&P15 series combines old-fashioned quality with cutting-edge design, and the offerings continue to expand. Read More »

The Smith & Wesson SD40
by by Paul Rackley, Associate Online Shooting Editor

S&W performs polymer magic with its SD series.
Read More »

The Smith & Wesson M&P Shield
by Joseph L. Kurtenbach, AR Assistant Editor

Unveiled at the NRA Annual Meetings & Exhibits in St. Louis, Mo., Smith & Wesson's newest product, the M&P Shield, is sure to turn heads. Read More »

S&W's New Bodyguards
by Wiley Clapp

S&W addresses America's interest in compact and concealable handguns. Read More »

Past Tips

Carrying in the Car
by Jim Wilson

Effectively carrying your firearm in a vehicle can prove to be a tricky task—here are some tips to help you prepare. Read More »

Defensive Handgun Maintenance Tips
by Jim Wilson

Regular care and maintenance keeps your carry gun ready for anything. Read More »

Concealed Carry: The Strong Side
by Paul Rackley, Associate Online Shooting Editor

Strong-side concealed carry keeps a gun close at hand. Read More »

Self-Defense Pistol 101
by Richard Mann

Using a handgun to defend your life requires more than just a familiarity with firearms. Read More »

 
 

1852

The year Smith & Wesson was founded.

80 Million

Estimated number of gun owners in the United States.

45 Million

Estimated number of handgun owners in the United States.

45%

Estimated number of American Households that have firearms.