Smith & Wesson Model 632 .327 Fed. Mag. Revolver

by NRA Staff


Almost as soon as ATK introduced its .327 Federal Mag. cartridge, attention turned to Smith & Wesson to see how the world’s pre-eminent manufacturer of revolvers would respond.

The Massachusetts-based maker’s first offering in the new cartridge is the Model 632 based on its time-proven J-Frame. It is especially noteworthy as S&W didn’t play it safe by initially introducing a basic gun; instead, it opted to launch a distinctive and elegant gun that may serve as the flagship of its subsequent .327 Federal Mag. line-up.

The significance of the .327 Federal Mag. is, of course, that by lengthening the .32 H&R Mag. case by 0.125 on an inch and thickening the case walls, ATK was able to create a cartridge of considerable muzzle energy that was nonetheless so narrow that six rounds would fit in a small revolver’s cylinder. While that is an increase of only one round, it can also be seen as a 20 percent improvement. In any event, it is something wheelgunners have longed for.

Aside from the chambering, what makes this J-frame different? First, it has a 3-inch barrel that includes an expansion chamber and port to reduce perceived recoil and muzzle rise. The pinned ramp front sight is necessarily set back from the muzzle. This configuration, called Carry Comp in S&W parlance, has often been seen on Performance Center revolvers. Additionally, the barrel has a full underlug that tapers near the muzzle.

The profile is highly distinctive, appearing functional but also graceful. The barrel’s length prevents the gun from having the stubby look of a true snub-nose. Further, it permits inclusion of a full-length ejector rod to completely clear spent cases.

Also departing from most small concealment guns, the rear sight is fully adjustable for windage and elevation; not unknown to S&W J-frames, but rare nonetheless. The hammer is small, narrow and deeply knurled. The trigger is broad and smooth.

It is a rather strange amalgam of features. The heavy barrel and adjustable sights of a target gun, the porting of a hunting gun and the smooth trigger and snag-resistant hammer of a combat gun. Yet it all works well together, both aesthetically and mechanically.

The full-size grip is actually a one-piece synthetic unit held by a single hex-head screw on the right side. It has finger grooves, a gentle palm swell and small oval-shaped texturing on the sides.

There is no such thing as a gun with universal fit, but the Model 632 comes as close as any small gun we’ve handled. Even those with very large hands didn’t have a sense of overwhelming the gun. Those with small-to-medium-size hands found it ideal. The Model 632 has an appealing matte-black finish, but the gun is actually built of stainless steel.

The overall dimensions dictate that this is a holster gun. It carried well in a Kramer Gunleather Horsehide Belt Scabbard. Strapping it on, one is tempted to compare the Model 632 to other J-frames, but that is a mistake. It is more appropriate to compare it to a medium-bore K-frame. The Model 632 compares favorably, having the same firepower and significant muzzle energy while being smaller, lighter and faster handling. It also compares favorably to many single-stack subcompact 9 mm Luger pistols. It’s neither as small nor light, but it provides six shots of 9 mm Luger +P-class power, has a full-size grip, better balance and the option of single-action operation.

At the range, the Model 632 performed satisfactorily. Neither the adjustable rear sights nor the exposed (though diminutive) hammer created any problems drawing from concealment.

Though the Model 632’s double-action trigger pull measured more than 12 pounds on our Lyman gauge, the pull was smooth, precise and exhibited little take-up. The excellent single-action pull felt lighter than the measured 3 pounds, 5 ounces.

Accuracy was typical for a small revolver, yet easier to achieve due to the sights and sight radius. Recoil was stout from full-power loads, but relatively mild from Federal’s low-recoil Hydra-Shok. The tested Model 632 was something of a spitter. Upon firing, particles would lightly sting the cheek, regardless of the ammunition used.

Categorizing the Model 632 is difficult. It might best be described as a belt gun for shooters with small to medium hands who prefer a wheelgun. It would also make an excellent trainer, one that fits a broad range of shooters and can initially be loaded with a wide variety of cartridges including .32 S&W, .32 S&W Long, .32 H&R Mag. and .327 Federal Mag. And that ammunition versatility, coupled with the gun’s features, make it a good all-around gun that can take small game, plink, be carried concealed and even serve as a house gun that can be handled by both men and women.

Manufacturer: Smith & Wesson; (800) 331-0852; www.smith-wesson.com
Caliber: .327 Federal Mag. (also .32 S&W, .32 S&W Long, .32 H&R Mag.)
Action Type: double-action, center-fire revolver
Frame: blackened stainless steel
Barrel: 3"
Rifling: five-groove, 1:18.75" RH twist
Cylinder capacity: six
Sights: pinned ramp front; square notch, fully-adjustable rear
Trigger Pull: double-action, 12 lbs., 4 ozs.; single-action, 3 lbs., 5 ozs.
Overall Length: 71⁄2"
Width: 15⁄16"
Height: 5"
Weight: 24.5 ozs.
Accessories: plastic case, cylinder lock
Suggested Retail Price: $1,011

 

Defensive Handgun Maintenance Tips

by Jim Wilson


There is no doubt that regular care and maintenance will improve the reliability and longevity of any firearm. This is especially true when it comes to the defensive handgun that you may have to bet your life on. Now, at the outset, I'm going to assume that you know how to clean a handgun. What I'm about to share are some little maintenance tips that I've learned through the years of carrying a handgun.

To begin, let's look at one aspect of the cleaning challenge, namely the use of lead bullets. Years ago, somebody decided that all he or she needed to do to get lead out of the barrel was to fire some jacketed rounds downrange and those jacketed bullets would scrub the lead right out of the bore. After all, following this little technique, the bore sure looked a lot cleaner. Unfortunately, such is not the case. All the jacketed bullets do is flatten the lead into the rifling creating a situation where moisture can get under the lead and allow corrosion and rust to start. Sorry folks, you've just got to work with that wire brush and patches until you get the lead out. There's really no other way.

One of the next biggest issues with defensive handguns is lubrication, whether too much or too little. Too little lubrication causes undue friction on the various moving parts of the handgun and can lead to reliability issues. Too much lubrication attracts dirt and powder particles, which can also lead to malfunctions. A light lubrication, each time the handgun is cleaned, will keep it running and functioning reliably.

In selecting the proper lubricant for your handgun, it is wise to stay away from heavy oils and to avoid the use of WD-40. WD-40 is a great product and quite useful, but it is not designed to be used on firearms. In many cases it can leave a solid residue that can lead to malfunctions. It is also a penetrating oil, which means it is just about guaranteed to kill any primers that it comes in contact with. The products to use are any of the lightweight lubricating oils that are especially designed for firearms.
 
A light application of oil should be put on the barrel locking lugs, or the area where the barrel interacts with the slide and frame. Another drop of oil should be applied near the muzzle of the barrel where it interacts with a barrel bushing, or the front of the slide. Also in need of lubrication are the pistol's slide rails. Occasionally, you will want to put a drop of oil on the sear and trigger mechanism.
 
With autoloading pistols it is also important to give consideration to replacing the recoil spring. This spring can become weakened under continued use and, in this weakened state, allow the gun to batter itself unnecessarily. Replacing the pistol's recoil spring about every 2,000 rounds is a good habit to get into.  After all, what is the cost of a recoil spring as compared to one's life?
 
A large majority of the auto pistol's malfunctions can generally be blamed on faulty magazines. They can become damaged in a number of ways and for a number of reasons. What is amazing is that so many shooters will just drop faulty magazines back in their shooting boxes and expect that, somehow, they will work okay during their next trip to the range. The proper place for a faulty magazine is the garbage can. 
 
With revolvers, it is important to lubricate the area where the cylinder yoke joins the frame. Occasionally, remove the slide plate and lubricate the trigger, sear and trigger return areas. Depending on the local climate, lubricating the internal parts of a revolver should only be done about twice a year.
 
During each cleaning session with your revolver it is important to check the ejector rod and make sure that it is screwed in tightly. These have a tendency to loosen up and, when they get loose enough, they will tie up the gun, making it virtually impossible to swing the cylinder out. If it becomes evident that an ejector rod is continually getting loose, a drop of Loctite on the threads will solve the problem.
 
During the revolver cleaning session it is also important to elevate the cylinder's extractor star and clean out any unburned powder and residue that may have become trapped there. Failing to do this may cause the cylinder to become difficult to close if enough residue builds up in this area.

If you are uncertain about how to properly lubricate that new pistol or revolver, you will find that most companies now provide those instructions in the owner's manuals. Yes, I know guys, but read the instructions anyway. No one has to know that you actually read the instructions.

At the end of an evening, I generally lay my defensive handgun on the nightstand by my bed. For years, I've made it a practice to keep an oily gun rag in the same place. It just takes a minute to wipe the handgun down, getting fingerprints and dirt off of the exterior.

Regular cleaning and lubrication, along with the replacement of weak and worn parts, will keep a defensive handgun in good shape for a lifetime. And that's not a bad idea at all, considering that you may well have to bet your life on it.

 

October 01, 2013

Jan Cooper, 72, was at home with her husband, Bob, 85, when she made a 911 call for help as a man attempted to break into their home. She told police to hurry as the assailant was on her back porch trying to gain entry through a sliding door. She told the police that she was armed with a .357 revolver and that she would shoot if need be. When she heard the door sliding open, she fired. The intruder fled, but was later found and arrested for burglary. "I don't mean to shoot anybody," said Cooper, "but whatever's necessary to literally stop them--he was not going to come into my home." (Foxnews.com, Anaheim, CA, 6/12/13)

Richard Duffy, 48, and his son were watching TV when an intruder broke down their front door. After a brief altercation the intruder was fatally shot, according to a spokesman for the Maine Department of Public Safety. Another man waited in a car, but fled after he heard the gunshots. (TheBlaze.com, Rome, ME, 10/1/13)

From The Armed Citizen Archives
March 1979: When Claudia Gray entered her El Paso apartment she was jumped by a man wearing only a stocking mask and a t-shirt. After the attacker and wrestled her to the bed, Gray warned him that she was expecting company. He got up and went to lock the front door, whereupon she grabbed a .22 cal. rifle from beneath the bed and shot him twice. After the police arrived and made the arrest, the previously convicted burglar was sentenced to seven years in the state penitentiary. (The Times, El Paso, Tex.)

 
 

Past Articles

Mix Six: The S&W Governor
by Wiley Clapp

Smith & Wesson calls it the "Mix-Six-Shooter" because you can mix and match loads to suit your needs. Read More »

S&W's New Bodyguards
by Wiley Clapp

S&W addresses America's interest in compact and concealable handguns. Read More »

Smith & Wesson's M&P Goes Long
by Michael Humphries

Smith & Wesson's M&P15 series combines old-fashioned quality with cutting-edge design, and the offerings continue to expand. Read More »

The Smith & Wesson SD40
by by Paul Rackley, Associate Online Shooting Editor

S&W performs polymer magic with its SD series.
Read More »

The Smith & Wesson M&P Shield
by Joseph L. Kurtenbach, AR Assistant Editor

Unveiled at the NRA Annual Meetings & Exhibits in St. Louis, Mo., Smith & Wesson's newest product, the M&P Shield, is sure to turn heads. Read More »

The Smith & Wesson Model 632 .327 Fed. Mag. Revolver
by NRA Staff

The S&W Model 632 is a good all-around gun that offers ammunition versatility and several features that allow for easy handling by both men and women. Read More »

Past Tips

Carrying in the Car
by Jim Wilson

Effectively carrying your firearm in a vehicle can prove to be a tricky task—here are some tips to help you prepare. Read More »

Concealed Carry: The Strong Side
by Paul Rackley, Associate Online Shooting Editor

Strong-side concealed carry keeps a gun close at hand. Read More »

Self-Defense Pistol 101
by Richard Mann

Using a handgun to defend your life requires more than just a familiarity with firearms. Read More »

Defensive Handgun Maintenance Tips
by Jim Wilson

Regular care and maintenance keeps your carry gun ready for anything. Read More »

 
 

1852

The year Smith & Wesson was founded.

80 Million

Estimated number of gun owners in the United States.

45 Million

Estimated number of handgun owners in the United States.

45%

Estimated number of American Households that have firearms.